Powered By Kitlog Pro v2.0
PAUL'S WEB SITE
Cabin Eagle
Wings
Work Logs Found:
156
Category Work Time:
396 Hours
Date
Hours
Work Log Summary
Details
04-03-2020
3.00
Reinstall aileron pivot and adjust ailerons. Taxi
08-07-2019
1.50
Prepare Jury struts
07-24-2019
2.00
Adjust strut lengths. Prime wing and tail struts
07-21-2019
3.00
Hanger - Reinstall wings
04-08-2019
1.50
Cut out wing gap seals to fit around cabin. Build
04-04-2019
1.50
Build wing gap seals
03-28-2019
0.50
Finish painting aileron pivots
03-27-2019
1.00
Wire wing end plate. Clean up anf paint aileron pi
03-21-2019
1.00
Touch up paint. Wire nav. light
03-20-2019
1.00
Mask and painr red stripe. unmask
03-19-2019
1.50
Mask and paint blue
03-18-2019
1.00
Paint grey on lower side
03-17-2019
1.00
Paint red strip on upper surface
03-14-2019
1.00
Spray final coat of blue on top side of wing
03-12-2019
1.50
Mask top side. 1st blue coat
03-11-2019
0.50
Fit aileron
03-10-2019
1.00
Spray grey on top side
03-09-2019
0.50
1st grey coat on top side
03-08-2019
1.00
Final primer coat
03-07-2019
0.50
Spray primer on top side
03-06-2019
1.00
2nd primer coat on top side of wing
03-03-2019
1.00
Prepare and brush primer coat on wing top surface
03-01-2019
15.00
1st color coat on underside of wing
02-28-2019
0.50
Last primer coat on underside
02-27-2019
1.00
Spray 2nd and 3rd cross coats
02-26-2019
0.50
Spray 1st cross coat on underside of wing
02-25-2019
1.00
Prime underside of wing
02-24-2019
4.00
Complete all taping. Shrink and tape aileron. Prep
02-21-2019
2.00
Complete rib stitching. Tape lower surfaces
02-20-2019
1.50
Rin stitch lower surface
02-19-2019
1.50
Prepare lower surface for rib stitching. Begin cov
02-18-2019
4.00
Rib stitch upper surface. Install empennage struts
02-07-2019
0.50
Complete top surface gluing. Prepare aileron
02-06-2019
1.50
Attach fabric to upper wing surface
02-05-2019
1.00
Complete shrink on lower wing surface. Prepare top
01-17-2019
0.50
Complete attaching lower surface wing fabric
01-16-2019
1.50
Attach lower surface wing fabric
01-15-2019
1.50
Prepare wing for covering. Anto chafe tape
01-14-2019
1.50
Prepare wing for covering
01-09-2019
1.50
Wing wiring. Prep for covering
01-08-2019
1.50
Mount OAT probe. Cover Right wing end surfaces
12-17-2018
1.00
Mount aileron
12-16-2018
0.50
Paint aileron
12-13-2018
0.50
Paint aileron
12-11-2018
1.00
Work on mounting wing end plate.Paint aileron
12-10-2018
1.00
Clean up wing end plates. First color coat on aile
12-09-2018
1.00
Paint touch up
12-08-2018
0.50
Route wing endplate
12-05-2018
0.50
Work on Aileron. Cut out inspection holes
12-04-2018
0.50
Touch up blue on under side
12-03-2018
1.50
Touch up grey on underside. Prep end plate
12-02-2018
1.00
Apply red stripe to top side
11-29-2018
0.50
Touch up blue on top side
11-28-2018
1.50
Paint blue on top side
11-26-2018
1.00
Prepare wing end plate template
11-25-2018
2.00
Paint grey and blue on under side
11-24-2018
1.50
Paint grey on top side
11-23-2018
1.00
Prime underside
11-20-2018
0.50
Spray final primer on top surface
11-19-2018
1.00
Spray 3rd coat primer on top surface
11-18-2018
2.00
Spray 1st two coats of primer
11-15-2018
0.50
Add tape to top surface along rear spar
11-13-2018
0.50
Sand top wing surface
11-12-2018
0.50
2nd coat primer on top surface
11-08-2018
2.00
Iron down tapes. 1st primer coat on topside
11-07-2018
1.00
Install leading edge tape
11-05-2018
1.00
2nd primer coat
11-04-2018
3.00
Rib stitching. Taping. 1st primer coat.
11-03-2018
3.00
Rib stitching. Taping
11-01-2018
1.50
Continue rib stitching. Prepare tapes to cover rib
10-31-2018
1.50
Rib stitching. Shrink fabric on aileron
10-30-2018
2.00
Rib stitching
10-29-2018
1.50
Rib stitching. Continue covering aileron
10-28-2018
2.50
Rib stitching. Begin covering aileron
10-21-2018
2.50
Shrink to skin
10-18-2018
1.50
Install fabric on top wing surface
10-17-2018
1.50
Continue to prep top side of wing
10-16-2018
1.50
Prep top side of wing for fabric
10-15-2018
1.50
Shrink fabric on bottob of left wing
10-14-2018
3.00
Cover bottom of left wing
10-11-2018
1.00
Cover end ribs
10-10-2018
1.00
Clean up wing. Prepare for covering.
10-02-2018
1.00
Begin wiring and plumbing left wing
10-01-2018
1.50
Clean up wing. Paint misc. parts. Repaint rudder b
09-23-2017
6.00
Mount wings
Details
05-25-2017
3.00
Mockup right wing. Build strut fittings. Measure f
06-18-2016
0.25
Put wings in storage and prepare bench for fuselag
06-14-2016
1.00
Varnish right wing
06-13-2016
1.00
Varnish Right wing
06-12-2016
1.00
Varnish Right Wing
06-11-2016
1.00
Varnish right wing
06-10-2016
1.00
Varnish right wing
06-05-2016
1.00
Varnish left wing
06-04-2016
1.00
Varnish left wing
06-03-2016
1.00
Varnish left wing
06-02-2016
1.00
Varnish left wing
06-01-2016
1.00
Varnish left wing
05-26-2016
14.50
Work on left wing
04-12-2016
4.00
Work on left wing aileron
03-31-2016
2.00
Generally cleaned up and sanded the left wing
03-25-2016
2.50
Filling the rear of the aileron pocket with flox.
Details
03-24-2016
1.00
Strengthened aileron with flox
Details
03-24-2016
1.50
Building the aileron pocket (left wing)
Details
03-23-2016
3.00
Building the aileron pocket (left wing)
Details
03-16-2016
1.00
Installing the aileron leading edge ply (left wing
03-15-2016
1.50
Preparing the aileronleading edge ply (left wing)
03-14-2016
2.50
Installing Aileron leading edge ribs left wing)
Details
03-13-2016
1.00
Cutting loose the left wing Aileron
Details
03-12-2016
2.00
Installing Aileron bracing (left wing)
Details
03-11-2016
2.00
Aileron spar (left wing)
Details
03-10-2016
2.00
Aileron Hinge block (left wing)
Details
03-08-2016
1.50
Working on Aileron (left wing)
Details
03-07-2016
1.50
Working on Aileron (left wing)
Details
03-06-2016
1.50
Working on Right wing aileron
Details
02-28-2016
24.00
Detail all stuff done to complete 2nd wing
01-27-2016
3.50
Installing leading edge ply (left)
Details
11-25-2015
8.00
Complete all bracing and reinforcing of the wing (
11-17-2015
3.50
Installing leading edge ply
Details
11-05-2015
1.50
Preparing leading edge ply
10-25-2015
6.00
Wing to fuselage and spar fittings (right wing)
Details
10-22-2015
1.50
Prepare leading edge D section
Details
10-07-2015
4.00
Installing the Wing leading edge ribs
Details
09-05-2015
6.00
Build the wing leading edge ribs
Details
08-30-2015
0.00
Wing out of storage and back on the bench
Details
08-30-2015
4.00
Complete the wing to fuselage and wing to spar fit
08-29-2015
4.00
Built the metal wing fittings
Details
03-01-2015
24.00
Complete the left wing to the same state as the ri
12-22-2014
9.00
Complete assembly of right wing
Details
12-14-2014
2.00
Rough cut leading edge ribs
12-04-2014
1.50
Complete strut and diagonal bracing, complete trai
12-03-2014
1.50
Complete strut and diagonal bracing, attach traili
12-02-2014
2.00
Glue in compression struts and diagonals, prepare
11-26-2014
2.00
Prepare compression and diagonals.
Details
11-24-2014
2.00
Glue in rear spar, add 1/8 pl;y spacer for fitting
11-24-2014
5.00
Atach all ribs, continue work on metal fittings
11-23-2014
6.00
Prepare right wing spars
Details
11-22-2014
2.00
Complete Strut and diagonal bracing, add gussets t
11-21-2014
1.50
Continue Strut and Diagonal bracing, attach traili
11-20-2014
6.00
Rough cut the wing to fuselage and wing to strut f
11-19-2014
1.50
Glue in compression struts and diagonals, prepare
11-18-2014
1.50
Glue in compression struts and diagonals (left win
11-17-2014
1.50
Glue in compression struts (left wing)
11-08-2014
2.00
Wing mockup with spars and ribs (left wing)
11-08-2014
3.50
Spars drilled for steel fittings
Details
10-27-2014
25.00
Spars finished
Details
09-17-2014
7.00
Spars continued
Details
09-03-2014
2.00
1st Spar initial layout
09-02-2014
1.00
Ribs are completed
Details
08-06-2014
5.57
19 ribs so far
Details
07-22-2014
5.06
The Pile of Ribs grows
Details
07-10-2014
5.06
6 Ribs built so far
06-24-2014
6.50
Finally completed making all the rib gussets
06-15-2014
2.00
Making rib gussets
06-14-2014
4.00
Cut all remaining wing rib capstrips
Details
06-01-2014
1.50
First Rib Layout
Details
05-17-2014
0.50
Building Rib Jig
Details
SITE NAVIGATION
Contact Builder
Cabin Eagle Home
Category
# Logs
# Hours
All
717
1313
Avionics
18
34
Empennage
63
98
Engine
21
44
Fuel System
16
22
Fuselage
289
460
General Assembly
50
132
Miscellaneous
73
93
None
11
Prop
1
2
Tools
3
10
Wings
156
396
Wings
16
22
Copyright © 2001-2024 Matronics. All Rights Reserved.
