Date
|
Hours
|
Work Log Summary
|
Details
|
06-18-2018
|
2.00
|
Out flow cowling work.
|
Details
|
|
|
05-31-2018
|
6.00
|
Worked on cowling. Prime, sand and fill 4 bids on
|
Details
|
|
|
04-26-2018
|
3.00
|
Rivet on hinges to lower cowling.
|
Details
|
|
|
04-18-2018
|
2.00
|
3 bids on lower wing for cowling hinge
|
Details
|
|
|
04-17-2018
|
2.00
|
Heat cowling to fit hinges.
|
Details
|
|
|
04-15-2018
|
3.00
|
Mount hinges to cowling and wing flange.
|
Details
|
|
|
04-14-2018
|
2.00
|
Upper and lower cowling hinge.
|
Details
|
|
|
04-13-2018
|
4.00
|
3 bids on wing for hinges to mount too.
|
Details
|
|
|
04-11-2018
|
2.00
|
Fill in lower cowling gap.
|
Details
|
|
|
04-10-2018
|
3.00
|
Cowling is ready to be joined.
|
Details
|
|
|
03-29-2018
|
4.00
|
Co-pilot wing cut out on cowling
|
Details
|
|
|
01-22-2018
|
4.00
|
Stainless was cut and riveted into place.
|
Details
|
|
|
11-27-2017
|
2.00
|
2 bids on outside cowling center section.
|
Details
|
|
|
11-24-2017
|
2.00
|
Work on center cowling to fit bottom and top
|
Details
|
|
|
11-23-2017
|
2.00
|
Hinges at end of cowling.
|
Details
|
|
|
11-21-2017
|
1.00
|
The heat lights to the rescue.
|
Details
|
|
|
11-19-2017
|
3.00
|
Installed cowling and gapped for clearance.
|
Details
|
|
|
11-19-2017
|
1.00
|
Fill and sand on cowling
|
Details
|
|
|
11-17-2017
|
1.00
|
Tig welded hinge pins to handle
|
Details
|
|
|
11-13-2017
|
5.00
|
Upper and lower wing hinges installed on flange an
|
Details
|
|
|
11-13-2017
|
2.00
|
Hing for upper and lower cowling
|
Details
|
|
|
11-12-2017
|
3.00
|
3 bids on upper wing for cowling hinge.
|
Details
|
|
|
11-09-2017
|
2.00
|
Cut cowling and 1 bids on outside
|
Details
|
|
|
11-08-2017
|
2.00
|
Bid the bottom to the top cowling
|
Details
|
|
|
11-05-2017
|
3.00
|
3 bids onto bottom wing for cowling to attach too.
|
Details
|
|
|
10-28-2017
|
2.00
|
Add cut peace back onto cowling.
|
Details
|
|
|
09-10-2017
|
3.00
|
Gapping wing to strake
|
Details
|
|
|
07-05-2017
|
4.00
|
Fit wing to cowling for cutting.
|
Details
|
|
|
05-16-2017
|
2.00
|
Move recirculation fan bracket
|
Details
|
|
|
05-07-2017
|
6.00
|
Install micro switch for throttle (gear up warning
|
Details
|
|
|
04-18-2017
|
5.00
|
Worked on securing cables and finished alternate a
|
Details
|
|
|
04-13-2017
|
5.00
|
I worked on the governor today.
|
Details
|
|
|
04-12-2017
|
4.00
|
Governor was put into place and making bracket for
|
Details
|
|
|
04-11-2017
|
3.00
|
Mounted throttle and mixture cables.
|
Details
|
|
|
04-10-2017
|
3.00
|
Mounts to hold the throttle and mixture cables.
|
Details
|
|
|
04-10-2017
|
2.00
|
Finish fuel lines with Tees and fire shield
|
Details
|
|
|
04-09-2017
|
2.00
|
Latch mounting for oil cowling door.
|
Details
|
|
|
04-07-2017
|
3.00
|
Run and mount Tee handle for alternate air source
|
Details
|
|
|
03-30-2017
|
2.00
|
Worked on alternate air source
|
Details
|
|
|
03-17-2017
|
3.00
|
Trim on fuel hatch door. Remove handle bases
|
Details
|
|
|
03-16-2017
|
2.00
|
Worked on oil hatch door.
|
Details
|
|
|
03-15-2017
|
5.00
|
Made alternate air source for fuel servo.
|
Details
|
|
|
03-14-2017
|
3.00
|
Worked on the oil access door today.
|
Details
|
|
|
03-13-2017
|
4.00
|
Worked on cabin air return
|
Details
|
|
|
03-12-2017
|
4.00
|
Worked on cabin heat system.
|
Details
|
|
|
03-11-2017
|
1.00
|
Structurally glued the front Naca door tab on
|
Details
|
|
|
03-11-2017
|
5.00
|
More fuel line work and heat shield for back cylin
|
Details
|
|
|
03-10-2017
|
2.00
|
Worked on Naca door
|
Details
|
|
|
03-10-2017
|
2.00
|
Worked on fuel lines from servo to spider
|
Details
|
|
|
03-09-2017
|
3.00
|
Made naca door @ oil cooler.
|
Details
|
|
|
03-07-2017
|
3.00
|
Glassed in air return duct for oil cooler
|
Details
|
|
|
03-06-2017
|
2.00
|
More work on cabin air return through oil cooler
|
Details
|
|
|
03-05-2017
|
3.00
|
Anchor nuts for winter cover mounted.
|
Details
|
|
|
03-03-2017
|
3.00
|
Worked on cabin return air
|
Details
|
|
|
03-01-2017
|
4.00
|
Making cabin return air fir heater
|
Details
|
|
|
02-27-2017
|
4.00
|
Time to micro the exhaust tubes on the cowling.
|
Details
|
|
|
02-26-2017
|
4.00
|
More fuel line work on plane
|
Details
|
|
|
02-25-2017
|
3.00
|
Clean up & 2 bid on inside of cowling for exhaust
|
Details
|
|
|
02-24-2017
|
2.00
|
Installed alternator and fuel servo line bumbs.
|
Details
|
|
|
02-23-2017
|
8.00
|
Fitted exhaust cowling tubes for exhaust pips.
|
Details
|
|
|
02-22-2017
|
4.00
|
Had to make room for alternator and made 4” tube
|
Details
|
|
|
02-21-2017
|
4.00
|
Cut cowling for exhaust and made 4” tube.
|
Details
|
|
|
02-20-2017
|
4.00
|
Fuel servo, fuel lines, and cowling cutouts
|
Details
|
|
|
02-15-2017
|
2.00
|
Ran more fuel lines.
|
Details
|
|
|
02-03-2017
|
4.00
|
Oil lines, fuel fiitings Throttle, mixture, govern
|
Details
|
|
|
01-18-2017
|
3.00
|
Run more fuel lines
|
Details
|
|
|
01-17-2017
|
4.00
|
Modified exhaust manifold to fit plane.
|
Details
|
|
|
01-04-2017
|
6.00
|
Running fuel lines and ordering fittings and stuff
|
Details
|
|
|
01-02-2017
|
2.00
|
Installed fuel boost pump regulator
|
Details
|
|
|
01-01-2017
|
5.00
|
Installed gascolator, fuel filter and fuel pump to
|
Details
|
|
|
12-20-2016
|
1.00
|
Flanged for oil cooler installed, Scat added.
|
Details
|
|
|
12-08-2016
|
1.00
|
Scat was installed for air intake
|
Details
|
|
|
11-27-2016
|
6.00
|
Make and install oil cooler shroud and radiator
|
Details
|
|
|
11-23-2016
|
2.00
|
Install fuel servo (carburetor)
|
Details
|
|
|
11-17-2016
|
5.00
|
Coffee can air-filter in new spot
|
Details
|
|
|
11-16-2016
|
3.00
|
Coffee can air filter work & retracts
|
Details
|
|
|
11-15-2016
|
5.00
|
More work on coffee air cleaner can
|
Details
|
|
|
11-14-2016
|
3.00
|
Making coffee can air filter can
|
Details
|
|
|
11-11-2016
|
3.00
|
Cleaned up side flange and make air cleaner flange
|
Details
|
|
|
11-03-2016
|
2.00
|
Staring to make the air cleaner can
|
Details
|
|
|
07-22-2016
|
2.00
|
Sand, assemble and paint air box with truck liner
|
Details
|
|
|
07-14-2016
|
2.00
|
Flange was cured and now to trim and bolt on
|
Details
|
|
|
07-13-2016
|
2.00
|
Work on the oil filler access trough plenum
|
Details
|
|
|
07-11-2016
|
3.00
|
Bolt on baffles to stop air from escaping
|
Details
|
|
|
07-06-2016
|
4.00
|
More work on air plenum
|
Details
|
|
|
06-28-2016
|
4.00
|
Riveted nut plates on, trimmed plug caps, and prim
|
Details
|
|
|
06-27-2016
|
3.00
|
Drill and fit caps over spark plug holes
|
Details
|
|
|
06-26-2016
|
4.00
|
Sand & prime main grear. 3" spark plug holes made.
|
Details
|
|
|
06-24-2016
|
4.00
|
Clean up bid, sand micro and add, sand fill prime
|
Details
|
|
|
06-23-2016
|
3.00
|
Trimmed glass, added to ends to stiffen, micro on
|
Details
|
|
|
06-20-2016
|
3.00
|
Glass inside of air box
|
Details
|
|
|
06-19-2016
|
5.00
|
Worked on plenum opening for air flow
|
Details
|
|
|
06-18-2016
|
6.00
|
Worked on intake to air box (plenum)
|
Details
|
|
|
06-14-2016
|
5.00
|
Work on air box and NACA runners
|
Details
|
|
|
05-23-2016
|
5.00
|
Worked on air plenum
|
Details
|
|
|
05-22-2016
|
3.00
|
Lay-up triax and now fitting to top of air plenum
|
Details
|
|
|
05-17-2016
|
4.00
|
Finish box and fit air plenum to cowling
|
Details
|
|
|
05-01-2016
|
5.00
|
Working on cooling plenum
|
Details
|
|
|
03-20-2016
|
3.00
|
Cut and fit plenum over cylinder heads
|
Details
|
|
|
03-15-2016
|
2.00
|
Glass up triax for plenum
|
Details
|
|
|
03-10-2016
|
2.00
|
Cut triax for air plenum
|
Details
|
|
|
03-03-2016
|
3.00
|
Making templates for cooling air plenum
|
Details
|
|
|
02-29-2016
|
3.00
|
Cylinder head plenum prep 4 bid
|
Details
|
|
|
02-28-2016
|
5.00
|
Header tank reinstalled, engine bolted on.
|
Details
|
|
|
02-27-2016
|
3.00
|
NACA outlet to fire wall
|
Details
|
|
|
02-22-2016
|
3.00
|
Engine mount back on engine
|
Details
|
|
|
02-21-2016
|
10.00
|
Engine work and prep for mounting
|
Details
|
|
|
02-16-2016
|
3.00
|
Triax added at bolt hole locations
|
Details
|
|
|
02-13-2016
|
3.00
|
Bolt engine to fire wall
|
Details
|
|
|
02-12-2016
|
3.00
|
Get engine out of crate and flox firewall stainles
|
Details
|
|
|
02-04-2016
|
3.00
|
Cowling on and engine brought home from hanger
|
Details
|
|
|
02-02-2016
|
4.00
|
Install fiberfrax and 1/16” stainless steel to fir
|
Details
|
|
|
01-31-2016
|
3.00
|
Floxed on lower cowling flange and clean up
|
Details
|
|
|
01-30-2016
|
3.00
|
Lower cowling flange for no screws
|
Details
|
|
|
01-29-2016
|
2.00
|
Floxed on cowling flange to firewall
|
Details
|
|
|
01-28-2016
|
3.00
|
Cut bid and did a 3 bid lay-up for upper cowling
|
Details
|
|
|
01-26-2016
|
3.00
|
Hang up canard, move plane, cleco cowling on.
|
Details
|
|
|
01-12-2016
|
1.00
|
Trace out firewall stainless
|
Details
|
|
|
01-11-2016
|
2.00
|
Sand NACA funnels and make template for firewall s
|
Details
|
|
|
01-10-2016
|
2.00
|
Removed NACA outflow funnels and trimmed
|
Details
|
|
|
01-09-2016
|
2.00
|
3 bid on the foam from the NACA outlet
|
Details
|
|
|
01-07-2016
|
2.00
|
NACA plenum cooling part of engine
|
Details
|
|
|
01-05-2016
|
1.00
|
Engine cooling plenum chamber
|
Details
|
|
|
01-01-2013
|
2.00
|
More heater work
|
Details
|
|
|
12-29-2012
|
3.00
|
Time to finish the heater to the cabin
|
Details
|
|
|
12-28-2012
|
3.50
|
Heater cable time
|
Details
|
|
|
12-27-2012
|
1.50
|
Sanded heater/cooler out flow
|
Details
|
|
|
12-24-2012
|
3.00
|
Oil lines get a place to be
|
Details
|
|
|
12-18-2012
|
3.00
|
Heater/Cooler work
|
Details
|
|
|
12-16-2012
|
1.50
|
Heater duct gets 1 bid lay-up
|
Details
|
|
|
12-15-2012
|
1.00
|
Heat shrinked oil lines.
|
Details
|
|
|
12-15-2012
|
3.00
|
Bolted on heater and lay-upped the out flow
|
Details
|
|
|
12-10-2012
|
1.00
|
Sand and attached foam
|
Details
|
|
|
12-09-2012
|
1.50
|
Refit out-let ducting
|
Details
|
|
|
12-08-2012
|
1.50
|
Heater tubes for cabin
|
Details
|
|
|
12-08-2012
|
1.50
|
Floxed in bed for weather stripping
|
Details
|
|
|
12-07-2012
|
1.00
|
Sanded cabin heater intake
|
Details
|
|
|
12-04-2012
|
2.50
|
More work on heater
|
Details
|
|
|
12-02-2012
|
3.50
|
More heater work
|
Details
|
|
|
11-30-2012
|
3.50
|
Bid in Heater/cooler scoop
|
Details
|
|
|
11-29-2012
|
2.50
|
Nose Mounted Cooler
|
Details
|
|
