Ed Lynn - Experimental Aircraft Builder's Log

Eds Vans RV-6A/7A Web Site

Work Logs Found: 20

Category Work Time: 0 Hours

Date	Hours	Work Log Summary	Details
12-10-2009	0.00	Prep and prime flap actuator cover parts.	Details


12-09-2009	0.00	Drill for platenuts on the flap backrest brace.	Details


12-08-2009	0.00	Misc flap actuator cover fabrication.	Details


12-07-2009	0.00	Rercess bolt in flap actuator channel.	Details


11-17-2009	0.00	Drill flap center bearing block.	Details


11-16-2009	0.00	Straighten WD-613 Flap Actuator Weldment.	Details


11-15-2009	0.00	9. Trim F-767 Attch Bracket to length.	Details


11-15-2009	0.00	8. Fabricate and drill F-767 Attach Plate.	Details


11-15-2009	0.00	7. Drill top of F-785A Backrest Brace.	Details


11-15-2009	0.00	6. Drill bottom of 785A Backrest Brace.	Details


11-15-2009	0.00	5. Fabricate flap actuator housing F-785B	Details


11-15-2009	0.00	4. Flap bearing block attach hole location is bad.	Details


11-15-2009	0.00	3. Fabricate flap center bearing block.	Details


11-15-2009	0.00	2. Mark up flap center bearing block F-680.	Details


11-15-2009	0.00	14. Fabricate spacer and fit Flap Actuator.	Details


11-15-2009	0.00	13. Match Drill 3 holes in F-766B through Channel.	Details


11-15-2009	0.00	12. Match Drill hole in F-766B Angle.	Details


11-15-2009	0.00	11. Match drill center hole in F-766C Plate.	Details


11-15-2009	0.00	10. Match Drill Actuator Channel through F-766C.	Details


11-15-2009	0.00	1. Fabricate flap actuator F-766B.	Details