Powered By Kitlog Pro v2.0
Larry Winger's 601XL Project
Zodiac CH 650
Empennage
Work Logs Found:
93
Category Work Time:
231 Hours
Date
Hours
Work Log Summary
Details
12-13-2008
3.00
Prepped and primed rudder parts
Details
12-13-2008
2.00
Finished new 650 rudder
Details
12-12-2008
2.75
Completed drilling rudder
Details
12-09-2008
3.50
Assembled trailing edge side of rudder
Details
12-08-2008
2.75
Assembled rudder skeleton
Details
12-07-2008
1.25
Fabricated rudder rear ribs #3 and #4
Details
12-06-2008
1.25
Remade rudder rear ribs #1 and #2
Details
12-06-2008
2.75
Fabricated vertical tail spar and doublers
Details
12-05-2008
3.75
Fabricated vertical tail leading & trailing edge s
Details
12-04-2008
1.75
Fabricated rudder rear ribs #1 and #2
Details
12-03-2008
2.00
Fabricated nose rib for new rudder
Details
01-25-2008
3.50
Finished polishing horizontal stabilizer/elevator
Details
11-12-2006
0.75
Temporarily connected and tested trim rocker & LED
Details
11-11-2006
3.25
Completed Empennage
Details
10-30-2006
2.00
Drilled out rivets and positioned new hinge
Details
10-29-2006
2.00
Riveted the elevator
Details
10-28-2006
2.50
Riveted bottom and part of top skin flange
Details
10-28-2006
4.00
Disassembled, deburred & primed elevator
Details
10-28-2006
8.25
Completed assembly of elevator & trim tab
Details
10-26-2006
3.00
Completed the Elevator cut out and bent strip
Details
10-24-2006
4.25
Installed upper and lower elevator horns
Details
10-22-2006
5.75
Completed all remaining elevator parts
Details
10-21-2006
3.00
Drilled rest of elevator and clecoed to stabilizer
Details
10-21-2006
4.25
Completed Upper & Lower Elevator Horns
Details
10-20-2006
1.75
Predrilled skins and attached ribs from bottom
Details
10-19-2006
1.50
Made Elevator Center Channel & installed L angles
Details
10-19-2006
3.00
Attached ribs to back and laid out rivet lines
Details
10-18-2006
1.25
Fixed the Elevator Skin Flange
Details
10-17-2006
1.00
Made form blocks for Elevator Ribs
Details
10-17-2006
5.00
Made elevator ribs and attempted elevator skin
Details
10-15-2006
3.50
Riveted tip ribs and pre-drilled fiberglass tips
Details
10-14-2006
7.25
Completed Stabilizer
Details
10-11-2006
5.50
Riveted stabilizer bottom skin
Details
10-10-2006
2.75
Secured Skeleton to table & made skin template
Details
10-09-2006
3.00
Cleaned, primed and riveted stabilizer skeleton
Details
10-09-2006
1.00
Bent Stabilizer Skin
Details
10-04-2006
1.75
Drilled center ribs to spar, L angle and deburred
Details
10-03-2006
3.00
Made attachment doublers and drilled front spar
Details
10-03-2006
1.00
Deburred and reassembled rear spar
Details
10-02-2006
2.50
Front Spar and Front Spar Attachments Remade
Details
09-29-2006
2.50
Drilled Stab Skeleton rivet holes to size
Details
09-29-2006
1.00
Added L angles to ends of stab spars
Details
09-25-2006
2.25
Drilled and clecoed stabilizer skeleton
Details
09-24-2006
1.00
Rear Spar Upper Doubler redone
Details
09-24-2006
4.50
Measured, drilled and clecoed rear spar
Details
09-23-2006
6.75
Metal cutting experiments and rear spar parts redo
Details
09-19-2006
1.50
Finished stabilizer front spar assembly
Details
09-19-2006
2.50
Completed rear spar assembly
Details
09-18-2006
2.50
Started stabilizer front spar assembly
Details
09-17-2006
0.75
Modified end rib forms to make center ribs
Details
09-17-2006
2.15
Completed stabilizer end ribs
Details
09-17-2006
4.50
Completed stabilizer center ribs
Details
09-16-2006
2.00
Remade rear spar attachment
Details
09-16-2006
3.75
Front spar attachment & rear spar attachment
Details
09-14-2006
3.00
End rib and attachment forms
Details
09-09-2006
4.25
Marked and pre-drilled front and rear stabilizer s
Details
09-07-2006
1.50
Made Horizontal Stabilizer Rear Spar
Details
09-06-2006
1.25
Made Front Spar for Horizontal Stabilizer
Details
09-06-2006
2.00
Completed spar doublers, shim and standard angles
Details
09-05-2006
1.25
Cut blanks for spar doublers & made 6T1-7HD
Details
09-04-2006
1.50
Rudder riveted and complete
Details
09-04-2006
1.50
Cleaned primer from exterior areas
Details
09-04-2006
1.50
Cleaned and primed skins
Details
09-03-2006
0.50
Prepared Rear Rib #3 for re-drilling
Details
09-03-2006
0.75
Deburred all rudder parts
09-03-2006
4.75
Added leading edge skin and drilled all holes
Details
09-02-2006
3.00
Trimmed bottom of trailing edge skin and pre-drill
Details
09-02-2006
0.75
Riveted Rudder Skeleton
Details
09-02-2006
0.75
Primer touch-up on rudder skeleton
09-02-2006
2.75
Drilled and clecoed trailing edge rudder skin
Details
09-01-2006
2.25
Prepped and primed rudder skeleton
Details
08-30-2006
1.00
Made Stabilizer Tip Ribs
Details
08-29-2006
0.75
Deburred and cleaned rudder parts
Details
08-27-2006
0.75
Re-drilled rudder skeleton rivet holes
Details
08-26-2006
2.50
Remade rib #1 and reinstalled
Details
08-25-2006
2.50
Pre-drilled and clecoed rudder skeleton
Details
08-25-2006
1.50
Final fabrication of tip and nose ribs
Details
08-25-2006
1.00
Cut spar doubler angles and marked spar and angles
Details
08-23-2006
0.75
Remade Vertical Tail Tip Rib
Details
08-23-2006
1.00
Completed Vertical Tail Tip Rib
Details
08-23-2006
1.75
Completed Doubler Angles and Bent Strip
Details
08-22-2006
2.00
Redo of rib 1 and fabrication of rudder nose rib
Details
08-20-2006
5.75
Completed Vertical Stabilizer Rear Ribs
Details
08-19-2006
3.00
Routed/chamfered forms and attempted rudder horn
Details
08-19-2006
3.00
Completed Vertical Tail (Rudder) Horn
Details
08-18-2006
1.50
Rough cut form blanks for rudder ribs
Details
08-15-2006
0.50
Bent Trailing Edge Rudder Skin
Details
08-12-2006
0.50
Bent Leading Edge Rudder Skin
Details
08-09-2006
3.00
Cut Rudder Skins
Details
08-08-2006
1.75
Bent Vertical Tail Spar
Details
07-27-2006
1.50
1st airplane part complete
Details
07-26-2006
2.00
Second attempt at rib
Details
07-18-2006
4.50
First form block and rib
Details
SITE NAVIGATION
Contact Builder
Zodiac CH 650 Home
Category
# Logs
# Hours
All
1084
3152
Avionics
77
284
Empennage
93
231
Engine
87
293
Fuselage
306
915
Miscellaneous
132
294
None
2
Planning
22
21
Shop Supplies
1
2
Tools
22
4
Total Hours
32
Wings
296
1103
Work Area
14
5
Copyright © 2001-2024 Matronics. All Rights Reserved.
