Powered By Kitlog Pro v2.0
JOHN'S WEB SITE
Defiant
Canard
Work Logs Found:
116
Category Work Time:
236 Hours
Date
Hours
Work Log Summary
Details
03-02-2021
0.75
Examine Canard for Areas Needing Repair
Details
02-27-2021
2.00
Continue fiberglass layup imperfection repairs
Details
02-26-2021
1.00
Finish carving out exposed foam areas in canard.
Details
02-26-2021
0.75
Continue sanding leading edge fiberglass transitio
Details
02-25-2021
1.75
Continue carving out foam from exposed canard area
Details
02-23-2021
1.25
Begin carving out foam from exposed areas of canar
Details
02-22-2021
2.50
Trim Canard Trailing Edge and Start Sanding Leadin
Details
02-21-2021
0.75
Taking care of some minor repairs to the canard la
Details
02-20-2021
8.00
Skin Bottom of Canard
Details
02-19-2021
0.50
Repair Canard Leading Edge with Expanding Foam
Details
02-19-2021
1.50
Cut Fiberglass for Canard Upper Skin Layup
Details
02-18-2021
2.00
Layout Lines for Canard Fiberglass Reinforcement P
Details
02-13-2021
0.75
Flox Canard to Tip Transition Areas
Details
02-13-2021
0.75
Fill Canard Core Joints
Details
02-13-2021
1.50
Feather Canard Trailing Edge Foam and High-Density
Details
02-12-2021
0.50
Add More Expanding Foam Repairs
02-08-2021
0.50
More sanding...
Details
02-07-2021
2.50
Sand off Excess Expanding Foam and Sand High-Densi
Details
02-06-2021
2.25
Plane and Sand Cured Spar Close to Final Shape
Details
02-06-2021
0.75
Add Expanding Foam to Spar/Foam Canard Transition
Details
02-04-2021
10.50
Lay up Upper Canard Spar
02-04-2021
2.00
Final Prep for Upper Canard Spar Layup
Details
02-04-2021
1.50
Clean Up After Canard Spar Layup
02-02-2021
0.75
Sand to Roughen Up the Sides and Bottom of Upper C
Details
02-01-2021
0.25
Rough-Trim High-Density Foam Inserts
Details
01-31-2021
0.50
Add Additional Micro to High Density Foam Gaps
Details
01-30-2021
0.50
Fill Gap in Fore and Aft Canard Sections with Micr
Details
01-30-2021
0.50
Add Expanding Foam to Repair Leading Edge and Cana
Details
01-29-2021
0.50
Anchor High-Density Foam Blocks into Canard w/Micr
Details
01-26-2021
2.00
Continue to Shape and Dry-Fit High-Density Foam In
Details
01-25-2021
1.25
Continue Carving Holes For High Density Foam Inser
Details
01-24-2021
1.75
Continue Carving Holes For High Density Foam Inser
Details
01-22-2021
0.75
Continue Carving Holes for High Density Foam Inser
Details
01-21-2021
2.50
Fill "Dents" in Foam, Layout Hard Foam Inserts, an
Details
01-17-2021
3.50
Finish Shaping Trailing Edges of Canard
Details
01-16-2021
2.25
Begin Cleaning up Canard Trailing Edges
Details
01-13-2021
0.50
Remove Dam and Trim off Excess Fiberglass from Cen
Details
01-13-2021
2.00
Continue Cleaning up Excess Fiberglass from Layup
Details
01-11-2021
1.00
Remove Peel Ply from Canard and begin Trimming Exc
Details
01-11-2021
1.00
Remove Peel Ply From Canard And Begin Trimming Exc
Details
01-09-2021
7.00
Skin Bottom of Canard
Details
01-09-2021
7.00
Skin Bottom Of Canard
Details
01-09-2021
2.00
Prep Canard for Bottom Skin Layup
Details
01-09-2021
2.00
Prep Canard For Bottom Skin Layup
Details
01-04-2021
1.25
Fill Pitot Tube Support Plate Main Opening with Wa
Details
01-04-2021
0.50
Draw Fiberglass Alignment Lines on Canard
Details
01-03-2021
0.75
Fill Screw Holes in Pitot Tube Support Plate with
Details
01-02-2021
1.75
Cut BID Fiberglass and Cover all Fiberglass to Pr
Details
01-01-2021
2.00
Cut UNI Fiberglass for Bottom of Canard
Details
12-31-2020
0.25
Add Peel Ply to Trailing Edges of Canard
Details
12-30-2020
2.50
Continue to Align Canard in Jigs
Details
12-29-2020
3.00
Continue to Align Canard in Jigs
Details
12-28-2020
2.25
Start Final Alignment of Canard in Jigs
Details
12-27-2020
1.25
Anchor Canard Cores to Jig
Details
12-22-2020
1.00
Sand Pitot Plate and Rivet in Nut Plates
Details
12-22-2020
0.50
Micro Pitot Tube Support Plate into Canard
Details
12-21-2020
1.75
Route Out Area for Pitot Tube Support Plate
Details
12-18-2020
2.00
Construct Pitot Tube Support Plate
12-16-2020
1.25
Use Expanding Foam to Perfect Canard Shape
Details
12-14-2020
0.75
Use Expanding Foam to Perfect Canard Shape
Details
12-10-2020
1.25
Use Expanding Foam to Perfect Canard Shape
Details
11-24-2020
0.25
Layout Position for Pitot Tube Support Plate
Details
11-24-2020
0.50
Begin Shaping Right Side Canard Tip
Details
11-23-2020
1.50
Finish Shaping Right Side Canard Tip
Details
11-22-2020
1.25
Continue Shaping Right Side Canard Tip
Details
11-21-2020
0.75
Sand Filled Canard Wire Channel Smooth
Details
11-21-2020
1.00
Begin Shaping Right Side Canard Tip
Details
11-21-2020
0.75
Begin Shaping Left Side Canard Tip
Details
11-20-2020
0.75
Fill Canard Wire Channel with Expanding Foam
Details
11-19-2020
1.75
Shape Pitot Tube Base
Details
11-19-2020
0.75
Final Shaping of Pitot Tube Support Mast
Details
11-18-2020
0.50
Drill Holes in Pitot Support Mast Base
Details
11-17-2020
1.50
Micro Canard Tips to Canard
Details
11-10-2020
2.25
Align Canard Tips in Jigs
Details
11-04-2020
0.75
Final Sand Epanding Foam
Details
11-02-2020
1.25
Sand Canard Spar Expanding Foam
Details
11-01-2020
1.00
Add Expanding Foam Along Canard Spar Edges
Details
10-25-2020
2.25
Sand Canard Spar Flush
Details
10-23-2020
13.50
Lay Up Bottom Canard Spar
Details
10-18-2020
1.25
Build and Install Lower Spar Bridge Dam
Details
10-10-2020
1.50
Fianl Sanding of Expanded Foam Repairs
Details
10-01-2020
1.25
Use Expanding Foam to Repair Canard Foam Damage Ar
Details
09-13-2020
3.00
Finish Canard Jig Alignment
Details
09-05-2020
2.50
Remove Vertical Canard Jigs and Begin Realignment
Details
09-03-2020
1.50
Micro Fore and Aft Canard Sections Together
09-01-2020
1.75
Final Canard Core Alignment
08-26-2020
1.75
Work on Canard Core Alignment
Details
08-25-2020
1.50
Finish Canard Jig Construction
Details
08-23-2020
0.75
Trim fiberglass of second edge of canard forward s
Details
08-20-2020
6.50
Layup Forward Section Shear Web
Details
08-18-2020
2.00
Cut Fiberglass for Canard Sheer Web
Details
08-16-2020
0.75
Finish Shaping Canard Core Edges
07-07-2020
1.00
Roundover Canard Leading Edge Core Edges
Details
06-13-2020
2.25
Micro Canard Leading Edge Cores Together
06-12-2020
2.75
Micro Canard Trailing Cores Together
Details
06-11-2020
4.00
Micro leading edge canard cores together
Details
06-10-2020
3.50
Work on Aligning Canard Jigs and Cores
06-10-2020
6.00
Adjust foreward canard core lengths
Details
05-28-2020
6.00
Set up jigs for forward canard core assembly
Details
05-26-2020
1.00
Trim out shear webs on canard trailing cores
Details
05-23-2020
2.00
Lay up aft canard sections shear webs
Details
05-22-2020
1.50
Cut UNI fiberglass for canard trailing edge shear
Details
05-21-2020
2.00
Clean up trailing canard cores and place in jigs
Details
05-19-2020
1.00
Micro together second pair of trailing edge canard
Details
05-17-2020
1.50
Micro'd together two of the training edge foam cor
Details
05-16-2020
2.00
Test assemble one set of training edge cores
Details
05-14-2020
1.50
Test fit trailing edge cores into jigs.
Details
05-10-2020
4.00
Set up canard jigs for training edge core ass
Details
05-04-2020
3.50
Hotwire split in canard cores for shear web
Details
04-28-2020
1.50
Use expanding foam to repair hotwire error on one
Details
04-28-2020
1.00
Final sand repair to canard and rudder cores
04-15-2020
4.00
Use expanding foam to repair one canard tip and ru
Details
04-14-2020
6.00
Construct canard jigs
Details
04-13-2020
2.00
Micro new leading edge section to damaged canard t
Details
03-26-2020
2.00
Cut blanks and mark layout lines for canard jigs
Details
12-24-2019
5.50
Finish canard templates and cut all canard cores
Details
SITE NAVIGATION
Contact Builder
Defiant Home
Category
# Logs
# Hours
All
521
917
Canard
116
236
Fuselage
7
29
Jigs
35
36
Main Spar
55
134
Miscellaneous
7
7
None
1
0
Shop
34
61
Tools
16
19
Winglets
80
118
Wings
170
277
Copyright © 2001-2024 Matronics. All Rights Reserved.
