Powered By Kitlog Pro v2.0
CAF Carl's Aircraft Factory
RV-8
All
Work Logs Found:
64
Category Work Time:
69 Hours
Date
Hours
Work Log Summary
Details
04-17-2006
0.00
The obligatory "everything together shot"
Details
04-17-2006
1.30
Finished riveting VS
Details
04-16-2006
2.50
Began riveting VS
Details
04-15-2006
1.40
Primed VS parts
Details
04-14-2006
1.10
Ready to prime
Details
03-30-2006
0.50
Countersunk the stiffener and dimpled the spars
Details
03-29-2006
1.60
Finished deburring skin and cut lightening holes
Details
03-26-2006
1.50
Edged and deburred VS parts
Details
03-22-2006
1.10
Match drilled VS skin and disassembled
Details
03-21-2006
1.00
Prepped ribs and match drilled spars
Details
03-19-2006
0.80
Finished off HS
Details
03-19-2006
0.30
Began working on Vertical Stablizer
Details
03-18-2006
1.90
Completed starboard side of HS
Details
03-17-2006
2.00
Riveted the skin to port side HS, and started star
Details
03-16-2006
2.60
Began riveting the skin to the HS frame
Details
03-03-2006
0.50
Primed HS skins
Details
03-02-2006
0.60
Riveted front HS spar
Details
03-02-2006
0.90
Finished rear HS spar
Details
03-01-2006
0.30
Set one rivet
Details
02-27-2006
2.00
Rivet HS Spar and prepared skins
Details
02-26-2006
1.50
Primed ribs and spars for HS
Details
02-23-2006
1.50
Final prep on HS parts
Details
02-21-2006
0.90
Set-up paint booth and tested primer
Details
02-19-2006
0.20
Tested fitted all parts prior to priming
Details
01-19-2006
0.30
Moved the bench grinder
Details
10-19-2005
0.40
Made carpet topped supports to hold the skin
Details
10-19-2005
1.10
Finished Dimpling starboard and port skins
Details
10-19-2005
1.10
Dimpled the skeleton and starboard HS skin
Details
10-18-2005
1.80
Finished deburring skins and ribs on HS
Details
10-16-2005
0.90
Deburred port side HS and started the skins
Details
10-15-2005
0.90
Deburred all holes on starboard HS
Details
10-14-2005
2.70
Repeated the previous steps for the starboard side
Details
10-13-2005
0.90
Match drilled all holes on skin and disassembled
Details
10-11-2005
1.40
Finished HS405 and 404 Ribs and match drilled the
Details
10-10-2005
0.60
Rearranged the shop space
Details
10-10-2005
0.60
Drilled, deburred and Clecoed port HS and added sk
Details
10-08-2005
0.80
Drilled HS405s
Details
10-07-2005
0.75
Edged HS405 and HS708
Details
09-13-2005
0.50
Prepared HS706 and HS707 ribs
Details
08-28-2005
0.50
Notched and prepared HS404 ribs.
Details
08-15-2005
0.75
Bent stiffeners and spar
Details
08-12-2005
1.10
Match drilled and tapered HS810-1 & HS814-1
Details
08-10-2005
0.30
Riveted HS411 assembly together
Details
08-10-2005
0.90
Deburred holes in HS609PP and primed
Details
08-09-2005
0.70
Match drilled HS411
Details
08-08-2005
1.75
Finished Stiffeners and match drilled spar
Details
08-06-2005
0.70
Broke edges on rear spar stiffeners
Details
07-27-2005
0.10
Bought Vicegrip edge roller from Cleaveland
Details
07-18-2005
2.00
Inventory small bags
Details
07-14-2005
2.00
Inventoried empennage kit
Details
07-08-2005
1.00
Rolled front edge and finished
Details
07-08-2005
2.50
Riveted spar and ribs to skin
Details
07-06-2005
0.70
Primed Ribs and Spar
Details
07-02-2005
0.90
Back Riveted stiffeners to skin
Details
06-18-2005
1.00
Primed parts
Details
05-01-2005
1.00
Setup back rivet plate
Details
04-22-2005
1.00
Drilled skin for stiffeners
Details
04-21-2005
0.20
Securely mounted the belt sander.
Details
04-20-2005
0.50
Drilled and deburred stiffeners.
Details
04-19-2005
2.00
Constructed stiffeners
Details
04-18-2005
0.80
Shop setup
Details
04-17-2005
1.00
Assembled Bench Grinder
Details
04-16-2005
1.50
Deburred Spar and ribs.
Details
04-15-2005
1.50
Received Tools
Details
SITE NAVIGATION
Contact Builder
RV-8 Home
Category
# Logs
# Hours
All
64
69
Empennage
45
51
Miscellaneous
3
2
Tools
7
5
Training Kit
9
11
Copyright © 2001-2024 Matronics. All Rights Reserved.
