KitLog pro

Powered By Kitlog Pro v2.0

Karl's RV14 Web Site
Work Logs Found: 446
Category Work Time: 1719 Hours
 Date
Hours
Work Log Summary

Details

 08-24-2018
27.00
Misc.prep for airworthy inspection.
Details

 08-14-2018
8.00
Interior
Details
     

 08-10-2018
10.00
Interior
Details
       

 07-31-2018
35.00
Misc. prep
       

 06-30-2018
26.00
Misc. prep

 06-07-2018
5.50
Misc.

 06-04-2018
5.00
Getting ready for final inspection
       

 05-25-2018
6.00
Misc.
       

 05-22-2018
65.00
Misc. stuff getting ready for flight!
Details

 05-03-2018
1.50
Worked on Skyview setup.
Details

 05-02-2018
2.50
Configure Dynon, installed right wingtip.
Details

 04-30-2018
5.00
Misc prep.
Details

 04-29-2018
5.00
Worked on rigging and flap installation.
Details

 04-28-2018
7.00
Installed rudder, ailerons and left flap.
Details

 04-27-2018
4.00
Installed HS, VS.
Details

 04-26-2018
4.50
Installed wings!
Details

 04-25-2018
2.50
Prepped wing for installation.
Details

 04-24-2018
2.80
Installed pitot tube and ADAHRS in left wing.
Details

 04-23-2018
3.00
Moved fuselage to hanger!
Details

 03-24-2018
7.00
Bled brakes, and misc items.
Details

 03-23-2018
6.00
Installed fron floor pans items removed for painti
Details

 02-03-2018
3.00
Finished rudder and panels.
Details
       

 02-02-2018
4.00
Masked rudder for stripes and painted access panel
Details
       

 02-01-2018
4.00
Painted rudder white.
Details
       

 01-30-2018
4.50
Painted wheel fairings and rudder white.
Details
       

 01-29-2018
2.30
Primed wheel pants.
Details
     

 01-28-2018
2.00
Finished fuesalge!
Details
       

 01-27-2018
3.50
Removed masking.
Details
       

 01-26-2018
4.50
Painted black stripe.
Details
       

 01-25-2018
9.00
Layed out fuselage strips and painted blue.
Details
       

 01-24-2018
4.00
Finished white.
Details
       

 01-23-2018
7.00
Prepped and primed fuselage.
Details
       

 01-10-2018
5.00
Finished wing striping.
Details
       

 01-09-2018
6.00
Painted wing stripes.
Details
       

 01-08-2018
4.00
Primered wings.
Details
       

 10-06-2017
2.00
Stripped both ailerons due to orange peel and runs
Details
       

 10-05-2017
10.00
Painting
Details

 09-28-2017
4.00
Prep and primed ailerons and flaps.
Details
       

 09-25-2017
4.50
Prepped Umps garage for painting!
Details

 09-24-2017
2.00
Striped VS & rudder for template.
Details
       

 09-05-2017
4.00
Installed yaw damper.
Details
     

 08-24-2017
6.50
Installed wings to fit root fairings.
Details
       

 08-23-2017
1.00
Installed canopy hinge covers.
Details
       

 08-20-2017
2.50
Canopy covers.
Details
       

 08-19-2017
2.00
Finished wing root fairings.
Details
       

 08-16-2017
2.00
41-05 Wing root fairings.
Details
       

 08-09-2017
3.50
Made template for wingtips.
Details
       

 07-21-2017
3.00
First power up!
Details
       

 07-17-2017
3.00
Misc.
Details
       

 07-13-2017
7.00
Finished panel! with few exceptions.
Details
       

 07-12-2017
4.00
Installed switches etc.
Details
       

 07-09-2017
3.50
Panel hook up etc.
Details
       

 07-07-2017
7.00
Started panel install.
Details
       

 06-04-2017
2.00
Wiring plus fitting canopy T handle.
Details
       

 05-31-2017
7.00
Wiring plus.
Details

 05-25-2017
4.00
Wiring
Details

 05-22-2017
3.00
Wiring
Details
     

 05-21-2017
4.00
Finished rear fiberglass fairing.
Details
       

 05-19-2017
4.50
Fitted empennage fairing.
Details
       

 05-17-2017
3.50
Wiring
Details

 05-10-2017
4.50
Wiring
Details
     

 05-08-2017
6.00
Wiring
Details
     

 05-07-2017
2.50
Wiring
Details
     

 05-06-2017
5.00
Wiring
Details
     

 04-29-2017
7.50
Wiring
Details

 04-27-2017
2.00
Wiring
Details

 04-26-2017
8.00
Wiring
Details
     

 04-25-2017
3.00
Wiring
Details

 04-22-2017
8.00
Wiring
Details
     

 04-20-2017
3.00
Wiring
Details

 04-18-2017
2.00
Wiring
Details
       

 04-17-2017
4.50
Wiring!
Details
       

 04-10-2017
4.50
Wiring
Details
       

 04-09-2017
3.50
Wiring
Details
       

 04-07-2017
4.50
Connecting wires!
Details
       

 04-06-2017
2.50
Installed speaker and seat heater wiring.
Details
       

 03-04-2017
3.00
Installed seat cushions to check panel layout.
Details
       

 02-26-2017
1.50
Installed parking brake & rudder trim assy.
Details
       

 02-23-2017
3.00
Avionics wire bundle install in aircraft.
Details
       

 02-20-2017
4.00
Installed all antenna coax wires.
Details
     

 02-19-2017
4.00
Installed Garmin GPS antenna and parking brake.
Details
       

 02-18-2017
6.00
Installed canopy harness.
Details
       

 02-02-2017
5.00
Constructed speaker installation.
Details
       

 01-20-2017
3.00
Finished engine electrical connections.
Details
       

 01-19-2017
5.00
Wired up engine.
Details
       

 01-02-2017
3.00
Installed pitch servo and finished ELT wiring.
Details
       

 12-21-2016
4.00
Fitted and installed Dynon avionics boxes.
Details
       

 12-14-2016
4.00
Built stand for avionics wiring and test.
Details
       

 10-20-2016
3.00
Installed Ameri-king ELT.
Details
       

 10-19-2016
3.00
Installed right wire harness in fuselage.
Details
       

 10-18-2016
3.00
Installed left fuselage harness.
Details
       

 10-17-2016
2.00
Putzzed around to get ready for electrical.
Details
       

 10-16-2016
2.50
Heater tubes, sniffle line etc.
Details
       

 10-13-2016
4.00
Messing with heater ducts and throttle linkage.
Details
       

 10-11-2016
2.00
Worked on exhaust heater connections.
Details
       

 10-10-2016
5.00
Installed throttle, mixture and prop controls.
Details
       

 10-06-2016
2.00
Finished oil cooler door and worked on lower cowl
Details
       

 10-04-2016
2.50
Worked on oil door and front cowl openings.
Details
       

 10-03-2016
2.00
Worked on exhast.
Details
       

 10-02-2016
5.00
Worked on exhaust system installation.
Details
       

 09-30-2016
9.50
Hooked up engine instrumentation etc.
Details
       

 09-29-2016
3.00
Glassed nose entrance and lower cowl.
Details
       

 09-28-2016
3.00
Fiberglassed lower cowl nose bowls.
Details
       

 09-25-2016
1.50
Started oil door & drilled bottom cowl screws.
Details
       

 09-22-2016
1.00
Fiberglassed cowl inlets, top cowl.
Details
       

 09-21-2016
4.00
Installed furnace in garage!
Details
       

 09-14-2016
1.50
Fiberglassed cowl ramps.
Details
       

 09-13-2016
2.00
Glassed cowl pin covers.
Details
       

 09-08-2016
5.00
Rivited cowl hinges on cowl.
Details
       

 08-19-2016
3.50
Worked on cowl side hinges.
Details
       

 08-18-2016
3.50
Cowl work.
Details
       

 08-17-2016
4.50
Worked on upper and lower cowl.
Details
       

 08-16-2016
8.00
Fitted top cowl.
Details
       

 08-15-2016
2.50
Cut cowl lines.
Details
       

 08-10-2016
2.00
Started top cowl.
Details
       

 08-09-2016
6.50
Installed prop & started on cowl.
Details
       

 08-08-2016
1.75
Installed baffle seals.
Details
       

 08-07-2016
1.50
Snorkel again!
Details
       

 08-06-2016
4.00
Worked on snorkel and alternator.
Details
       

 08-05-2016
4.25
Worked on snorkel and baffleing.
Details
       

 08-03-2016
6.50
Engine connections and started installing baffle.
Details
       

 08-02-2016
2.50
Hung engine on airframe!
Details
       

 07-31-2016
5.00
Front baffle work
Details
       

 07-10-2016
6.50
Worked on wheel pants.
Details
       

 07-06-2016
3.50
Worked on wheel pants.
Details
       

 06-17-2016
2.00
Worked on oil cooler installation.
Details
     

 06-13-2016
5.50
Worked on engine baffles.
Details
     

 06-12-2016
1.00
Worked on baffels.
Details
       

 06-10-2016
6.50
Started firewall and baffles.
Details
       

 06-09-2016
8.00
Finished wheel pants!
Details
       

 06-08-2016
1.50
Nose fairings.
Details
       

 06-07-2016
4.00
Nose fairing again.
Details
       

 06-06-2016
4.00
Fitted nose pant.
Details
       

 06-05-2016
2.50
Worked on nose wheel fairing.
Details
       

 06-04-2016
1.50
Worked on fairings, again!
Details
       

 06-03-2016
15.00
Engine prep and run on dyno.
Details
       

 06-01-2016
5.00
Fiberglass strut work, mains.
Details
       

 05-31-2016
2.00
Worked on right wheel fairings.
Details
       

 05-30-2016
2.00
Worked on strut fairings.
Details
       

 05-30-2016
5.00
Ran engine on dyno for first time!
Details
       

 05-29-2016
2.50
Started strut fairings.
Details
       

 05-21-2016
2.00
Installed spring doors on wheel pants.
Details
       

 05-10-2016
2.00
Worked on left wheel pant.
Details
       

 05-04-2016
3.50
Completed mounting of left pant.
Details
       

 05-03-2016
2.50
Fitted right wheel pant.
Details
       

 05-02-2016
3.50
Started main gear fairings.
Details
       

 04-23-2016
6.50
Installed rear window and stair struts.
Details
       

 04-21-2016
7.00
Prepped rear window for installation.
Details
       

 04-20-2016
2.50
Moved engine from basement to garage!
Details
       

 04-11-2016
2.50
Installed key latch for canopy.
Details
       

 04-10-2016
7.00
Installed seals on canopy and side studs.
Details
       

 04-09-2016
5.50
Brake lines & misc. items
Details
       

 03-31-2016
2.00
Installed axle shims and tire assemby on left side
Details
       

 03-30-2016
9.00
Put wheels together, installed nose wheel.
Details
       

 03-28-2016
2.00
Removed tabl stand and measured camber.
Details
       

 03-24-2016
3.00
Installed engine mount and nose gear.
Details
       

 03-23-2016
3.00
Installed right & left gear legs.
Details
       

 03-21-2016
1.50
Reconfigured garage into shop again today!
Details
       

 01-10-2016
1.00
Finished canopy except for paint!
Details
       

 01-07-2016
1.00
Canopy sanding again!
Details
     

 01-06-2016
1.00
Canopy fairing again...
Details

 01-05-2016
1.00
Canopy fairing work.
Details
       

 01-03-2016
1.50
Continued sanding canopy!
Details
       

 12-30-2015
1.50
Worked on canopy fairing.
Details
       

 12-29-2015
2.00
started to sand canopy to frame.
Details
       

 12-26-2015
2.50
Initial fiberglass of canopy to frame.
Details
       

 12-20-2015
3.00
Installed void filler on canopy.
Details
       

 11-16-2015
2.00
Reversed rudder cables due to mistake.
Details

 11-15-2015
3.00
Reset canopy on fuselage for tightning.
Details

 11-13-2015
3.00
Installed bubble canopy on frame.
Details
       

 10-31-2015
7.00
Finished painting on canopy frame and roll bar.
Details
       

 10-30-2015
1.00
Second coat on canopy frame.
Details
       

 10-29-2015
2.00
Started painting canopy frame and associated parts
Details
       

 10-26-2015
3.50
Prepped inside of fuselage for painting roll bar.
Details
       

 10-03-2015
1.00
Removed bubble. Frame prepped for paint.
Details
       

 10-01-2015
4.50
Taped fwd edge of canopy.
       

 09-29-2015
3.50
Countersunk and drilled canopy to frame.
Details
       

 09-28-2015
6.50
Fitted canopy to frame.
Details
       

 09-17-2015
2.50
Fitted canopy on airframe!
Details
       

 09-16-2015
3.50
Rivited canopy frames and intercoastal.
Details
       

 09-15-2015
4.50
Rivited canopy skin.
Details
       

 09-13-2015
3.50
Canopy up to 38-15.
Details
       

 09-12-2015
2.00
Worked on canopy rails.
Details
       

 09-12-2015
3.50
Started to prime interior parts. Worked on side r
Details
       

 09-09-2015
2.50
Started on side rails.
Details
       

 09-06-2015
4.50
Worked on forward canopy assembly.
Details
       

 09-05-2015
2.00
Started on canopy front metal work.
Details
       

 08-29-2015
1.50
Worked on canopy latch assembly.
Details
     

 08-28-2015
3.00
Totally finished rear window!
Details
       

 08-26-2015
3.50
Worked on rear window.
Details
       

 08-25-2015
2.75
Drilled rear window to fuselage.
Details
       

 08-24-2015
2.00
Finished seat backs.
Details
       

 08-24-2015
2.50
Completed 98% of section 42.
Details
       

 08-23-2015
4.00
Started section 39, seat backs.
Details
       

 08-23-2015
4.50
Finished Fuselage kit!
Details

 08-22-2015
2.50
Installed roll bar.
Details
       

 08-21-2015
2.50
Finished control sticks. Started on roll bar attac
Details
       

 08-20-2015
1.50
Ground elevator stops to get correct clearence.
Details
     

 08-19-2015
5.00
Installed elevator belcrank and tubes.
Details
       

 08-17-2015
5.50
Odds and ends. Finished roll bar assembly.
Details
       

 08-16-2015
1.50
Sealed top of canopy edge.
Details
       

 08-13-2015
3.00
Worked on roll bar.
Details
       

 08-12-2015
2.50
Worked on elevator pushrods etc.
Details
       

 08-11-2015
2.00
Started section 34.
Details
       

 08-10-2015
3.50
Installed rudder pedals.
Details
     

 08-09-2015
4.00
Nailed on front top skin.
Details
       

 08-07-2015
2.00
Routed rudder cables.
Details
     

 08-07-2015
5.00
Finishing kit came today!
Details
       

 08-05-2015
2.00
Worked on section 33.
Details
       

 08-05-2015
2.00
Redid brake pedals!
Details
       

 08-04-2015
1.50
Moved fuselage back to my garage.
Details
       

 08-03-2015
2.00
Painted inside of fuselage.
Details
       

 08-02-2015
3.50
Painted primer on inside.
Details
       

 08-01-2015
4.00
Worked on forward top panel.
Details
       

 07-31-2015
2.00
Completed section 35-18.
Details
       

 07-30-2015
5.00
Completed up to 35-18.
Details
       

 07-29-2015
4.50
Completed up to 35-14.
Details
       

 07-28-2015
4.00
Installed side rails.
Details
       

 07-27-2015
2.50
Worked on upper fuselage.
Details
       

 07-25-2015
2.00
Section 35-07.
Details
       

 07-24-2015
1.00
Page 35-04 & 05.
Details
       

 07-23-2015
1.00
Completed page 35-02 & 03.
Details
     

 07-15-2015
2.00
Started sec 35.
Details
       

 07-07-2015
2.00
Completed rudder pedals.
Details
       

 07-04-2015
3.00
Started brake pedals and finished up odds and ends
Details
       

 07-03-2015
3.50
Finished Baggage floor and sides!
Details
       

 07-01-2015
4.00
Finished baggage floor.
Details
       

 06-30-2015
4.00
Rivited baggage floor to structure.
Details
       

 06-29-2015
3.00
Worked on baggage floors, prepped!
Details
       

 06-28-2015
4.00
Completed section 31 fuel system.
Details
       

 06-25-2015
2.50
Finished riviting bottom ribs for floor.
Details
     

 06-24-2015
5.50
Rivited fwd and aft fuselage together!
Details
       

 06-23-2015
3.00
Clecoed aft baggage bulkheads.
Details
       

 06-21-2015
2.00
Joined the front and aft fuselage.
Details
       

 06-20-2015
1.00
Moved fwd fuselage from basement to garage.
Details
       

 06-19-2015
3.00
Set up garage workshop!
Details
       

 04-25-2015
2.00
Installed spider.
Details

 04-13-2015
3.00
Finshed section 29.
Details
       

 04-12-2015
1.60
Completed page 29-20.
Details
       

 04-08-2015
1.50
Page 29-20.
Details
       

 04-07-2015
4.50
Page 29-19 & 20.
Details
       

 04-06-2015
2.00
Completed page 29-18.
Details
       

 04-03-2015
2.00
Tore down one bench and reconfigured basement shop
Details
       

 04-02-2015
8.00
Completed riviting both sides.
Details
       

 03-30-2015
5.00
Finished riviting left side skin!
Details
       

 03-29-2015
4.00
Started to rivit left side.
Details
       

 03-27-2015
2.00
Worked on left side skin formers and associated pa
Details
       

 03-26-2015
4.00
Sections 29-12 & 13.
Details
       

 03-25-2015
6.50
Preped and Worked on side skins and associated par
Details
       

 03-24-2015
2.00
Left side panel prep.
Details
       

 03-22-2015
4.50
Fitted side skins and through section 29-08.
Details
       

 03-21-2015
4.00
Sections 29-6 & 7.
Details
       

 03-16-2015
3.00
Section 29-5.
Details
       

 03-15-2015
2.50
Finished riviting bottom of fuselage fwd section.
Details
       

 03-13-2015
1.50
Started to rivit spar line.
Details
       

 03-09-2015
1.50
Worked on section 29-03 & 04.
Details
       

 03-07-2015
2.00
Repaired mistake.
Details
       

 03-06-2015
5.50
Started section 29, joined front and rear!
Details
       

 03-05-2015
8.00
Completed section 28!
Details
       

 03-04-2015
7.00
Completed firewall.
Details
       

 03-03-2015
3.00

Details
       

 03-02-2015
3.00
Finished section 27.
Details
       

 02-28-2015
4.00
Section 27-4.
Details
       

 02-26-2015
4.50
Started section 27 firewall.
Details
       

 02-25-2015
5.50
Completed section 26!
Details
       

 02-24-2015
3.50
Worked on baggage area floor ribs.
Details
       

 02-23-2015
7.50
Rivited fwd section 26-14 thru 16.
Details
       

 02-22-2015
3.00
Started riviting bottom skin to crotch strap.
Details
       

 02-21-2015
3.00
Worked on section 26-13.
Details
       

 02-19-2015
1.50
Worked on gear brace, sect 26-12.
Details
     

 02-19-2015
3.00
Dimpled lower skin.
Details
       

 02-18-2015
2.50
Started to prep bottom skin.
Details
       

 02-17-2015
5.00
Continued on section 26.
Details
       

 02-16-2015
6.00
Worked on baggage floor area of fwd fuselage.
Details
       

 02-15-2015
4.00
Prepared baggage area ribs.
Details
       

 02-14-2015
2.00
Worked on spar box.
Details
       

 02-12-2015
6.00
Section 25 pages 3 thru 4
Details
       

 02-12-2015
1.50
Finished section 25!
Details
       

 02-11-2015
3.00
Started forward fuselage section!
Details
       

 02-10-2015
40.00
Engine 95% complete. Waiting on parts, hoses and i
Details
       

 12-11-2014
0.00
Picked up engine parts from LyCon (Conway was ship
Details
       

 12-11-2014
0.00
Fuselage kit recieved today!
Details

 11-12-2014
0.50
Fabricated new elevator trim pushrod from Vans
Details

 09-07-2014
5.00
Finished empennage!
Details
       

 09-06-2014
7.00
Worked on HS and VS.
Details
     

 09-05-2014
5.00
Worked on HS attachment.
Details
       

 09-01-2014
1.00
Dimpled top piece.
Details

 08-29-2014
4.50
Dimpled sides and prepped top.
Details
       

 08-28-2014
6.00
Finished bottom section and turtle deck.
Details
       

 08-24-2014
1.50
Installed pitot line.
Details
       

 08-22-2014
3.00
Routed electrical.
Details
       

 08-17-2014
1.50
Nailed on side skin stringers.
Details
       

 08-17-2014
2.50
Fitted sides on bottom.
Details
     

 08-16-2014
2.00
Primed side skins
Details
       

 08-12-2014
3.00
Prepped side skins on bottom fitted stringers.
Details
       

 08-10-2014
4.50
Dimpled sides & stringers.
Details
       

 07-11-2014
2.50
Preped lower skin.
Details
       

 07-05-2014
4.50
Preped and rivited bulkheads.
Details
       

 07-02-2014
3.00
worked on bulkheads
Details
       

 05-23-2014
1.00
Debur continued.
Details
     

 05-22-2014
1.50
Started fusalage tail.
Details
       

 04-13-2014
1.00
Boxed up lower end to send out.
Details
       

 04-09-2014
1.00
Split case!
Details
       

 04-09-2014
1.00
Finished elevators!
Details
       

 04-08-2014
1.00
Installed tab.
Details
       

 04-06-2014
3.50
Finished riviting both elevators.
Details
       

 03-30-2014
2.50
Removed oil sump and accessory case.
Details
       

 03-29-2014
2.00
Started tear down of engine.
Details
       

 03-29-2014
3.00
Glued ribs on trailing edge of elevators.
Details
       

 03-25-2014
2.00
Riveted right elevator.
Details
       

 03-24-2014
1.50
Work on left elevator.
Details
       

 03-23-2014
5.00
Started to rivit left and right elevator.
Details
       

 03-22-2014
3.00
Primed parts.
Details
       

 03-19-2014
1.50
Rivited right and left front spar outer attachment
Details
       

 03-16-2014
2.00
Dimpled inside ribs.
Details
       

 03-15-2014
5.50
Finished left elevator trim tab.
Details
       

 03-12-2014
6.00
Elevator prep.
Details
       

 03-12-2014
1.00
Brought engine downstairs from garage.
Details
       

 03-06-2014
2.50
Preped left elevator.
Details
       

 03-04-2014
2.50
Started on elevator, left side.
Details
       

 03-01-2014
3.00
Finished HS!
Details
       

 02-28-2014
1.50
Continued riveting HS.
Details
       

 02-26-2014
2.00
Rivet HS.
Details
       

 02-25-2014
3.00
Started to rivet skins on HS.
Details
       

 02-23-2014
2.50
Dimpled and primed skins.
Details
       

 02-20-2014
3.50
Primed interior ribs and spars.
Details
       

 02-18-2014
4.50
More spar prep and formers.
Details
       

 02-17-2014
3.00
Worked on HS spars.
Details
       

 02-16-2014
2.00
Started HS.
Details
       

 02-13-2014
1.00
Cleaned shop for H stabalizer.
Details
       

 02-11-2014
2.00
Worked on rudder fairings.
Details

 02-09-2014
6.00
Finished rudder!
Details
       

 02-08-2014
2.50
Continued with rudder assembly.
Details
       

 02-06-2014
3.00
Primed skins and riveted skin stiffners.
Details
       

 02-05-2014
4.00
Prepped rudder skin and ribs.
Details
       

 02-02-2014
3.00
Started rudder. Deburred parts for spar.
Details
       

 02-02-2014
1.00
Mounted support for control storage on ceiling.
Details
       

 02-01-2014
2.50
Finished VS!
Details
       

 01-31-2014
3.50
Riveted frame on VS. Primed VS skin and parts.
Details
       

 01-29-2014
2.50
Installed Aero LED nav lights in wingtips.
Details

 01-28-2014
2.00
Repaired left wing tip, fiberglass.
Details
       

 01-25-2014
6.00
Started VS.
Details
       

 01-25-2014
2.00
Completed both wings!
Details

 01-24-2014
2.00
Worked on securing wiring for pitot tube.
Details

 01-23-2014
1.00
Putzz in shop combined extra hardware.
Details

 01-22-2014
3.50
Installed and fitted left wing tip.
Details

 01-21-2014
2.00
Installed nutplates on left wing tip.
Details
       

 01-20-2014
3.50
Finished right wing tip!
Details
       

 01-19-2014
6.50
Finished right aileron. Started right wing tip.
Details
       

 01-18-2014
5.00
Worked on right aileron. Trailing edge left to do
Details

 01-17-2014
1.50
Continued to assemble right aileron.
Details
       

 01-16-2014
2.50
Started to assemble right aileron.
Details
       

 01-12-2014
4.00
Rivited left aileron.
Details
       

 01-11-2014
8.00
Worked on left aileron.
Details
       

 01-08-2014
2.00
Started work on control rods, just need to prime.
Details
       

 01-06-2014
4.00
Started to prepare deburr aileron parts.
Details
       

 01-05-2014
3.50
Finished right flap and started to prepare left ai
Details
       

 01-04-2014
2.00
Prepared to rivit bottom of right flap.
Details
       

 01-02-2014
3.00
Riveted bottom skin on right flap.
Details
     

 12-31-2013
2.50
Rivited right flap spar attachments.
Details
       

 12-29-2013
4.00
Worked on Rt flap
Details
       

 12-15-2013
4.00
Took inventory of tail kit with Dad.
Details
       

 12-14-2013
5.00
Empanage kit arrived!
Details
       

 11-03-2013
1.50
Finished left flap!
Details
       

 10-20-2013
2.00
Continued riveting left flap.
Details
       

 10-19-2013
5.00
Started to rivet left flap together.
Details
       

 10-18-2013
2.00
Started to rivet left flap.
Details
       

 10-17-2013
7.50
Dimpled and preped left flap for riveting.
Details
       

 10-15-2013
2.50
Finished rt lower wing skins!
Details

 10-13-2013
1.50
Finished riveting rt outboard lower wing skin.
Details
       

 10-11-2013
2.50
Started to rivet rt wing lower outboard skin.
Details
       

 10-10-2013
2.00
Finished riveting rt wing lower inboard panel.
Details
       

 10-07-2013
1.50
Started to prep right lower wing panels.
Details
     

 10-06-2013
1.00
cleaned up shop!
Details
       

 10-03-2013
5.00
Finished riveting lower skins and access panels!
Details
       

 10-02-2013
3.00
Started riveting on left wing lower outboard skin.
Details
       

 09-26-2013
3.00
Started to rivit left outboard bottom skin.
Details
       

 09-25-2013
2.00
finished left inbd bottom wing skin.
Details
       

 09-24-2013
3.00
Started to rivit left inbd bottom skin
Details
       

 09-21-2013
5.00
Nailed on flap fairings and prepared left wing ski
Details
       

 09-20-2013
2.00
Installed flap fairing on left wing.
Details
       

 09-19-2013
2.50
Left wing wiring and AOA tube installation.
Details
       

 09-17-2013
2.00
Installed left wing tank on spar.
Details
       

 09-13-2013
4.00
Installed Gretz Areo Pitot tube kit.
Details
       

 09-08-2013
5.00
Attached rt fuel tank then installed wirng harness
Details
       

 09-06-2013
1.00
Pressure tested left tank, held OK.
Details
       

 09-01-2013
2.00
Big day! Pressure checked fuel tanks.
Details
     

 08-28-2013
1.00
Installed left tank vent tube and end.
Details
     

 08-27-2013
1.00
Final seal on right tank.
Details
       

 08-25-2013
5.00
Installed baffel on right tank.
Details
       

 08-22-2013
4.00
Installed rear baffel on left tank.
Details
       

 08-04-2013
6.00
Sealed/assembled right fuel tank
Details
     

 08-02-2013
5.50
Sealed and clecoed right tank
Details
       

 07-25-2013
1.00
Started right tank initial fit.
Details
     

 07-21-2013
2.50
Installed tank vent and end rib on left tank.
Details
       

 07-18-2013
3.50
Rivited left tank.
Details
       

 07-16-2013
3.50
Sealed and clecoed left tank.
Details
       

 07-11-2013
1.00
Resealed stiffners, right & left tanks.
Details
       

 07-10-2013
3.00
Rivited stiffners right tank.
Details
       

 07-09-2013
4.00
Installed stiffners on left tank!
Details
       

 07-07-2013
2.50
First day with PRC!
Details
       

 07-01-2013
2.00
Clecoed left tank for fit.
Details
       

 06-29-2013
3.50
tank brackett
Details
     

 06-20-2013
2.00
Dimpled tank skins, L & R
Details
     

 06-14-2013
7.00
prep tank skins
Details
       

 06-13-2013
1.00
tank prep
Details
     

 06-11-2013
1.00
Tank prep
Details
       

 06-09-2013
1.00
Prep
Details
       

 06-08-2013
1.00
Cut out stencils for flaps and preped rt tank ribs
Details
       

 06-07-2013
1.00
Deburr right wing tank
Details
       

 05-11-2013
1.50
deburred left fuel tank ribs
Details
       

 04-27-2013
3.00
Rivited leading edges on both wings.
Details
       

 04-26-2013
5.00
Landing light lenses.
Details
       

 04-25-2013
6.00
Preped skin and started riviting on rt wing leadin
Details
       

 04-24-2013
2.50
Started rt outboard leading edge
Details
     

 04-23-2013
1.00
Worked on stall warning assemble.
Details
       

 04-21-2013
3.50
Nailed skin on left wing leading edge.
Details
       

 04-19-2013
3.00
Leading edge skin, left wing.
Details
       

 04-12-2013
6.00
Started left wing leading edge
Details
       

 04-07-2013
4.50
Finished top skins, right wing.
Details
       

 04-06-2013
4.00
Prep right top skins
Details

 04-05-2013
3.00
Dimpled rt top skins.
Details
       

 04-04-2013
2.00
Skin prep rt top wing.
Details
       

 04-03-2013
3.00
Started top skins on Rt. wing.
Details
       

 04-02-2013
4.50
Nailed top wing skin on left wing
Details
       

 03-30-2013
3.50
Started riveting top skins, left wing.
Details
       

 03-27-2013
2.50
started top skin on left wing
Details
       

 03-26-2013
2.00
Started to rivet rear spar on rt wing
Details
       

 03-24-2013
6.00
Rear spar right wing
Details
       

 03-23-2013
5.00
Finished ribs, rt wing
Details
       

 03-22-2013
5.00
fabricated flap and aileron brackets
Details
       

 03-20-2013
2.50
Finished section 13 left wing!
Details
       

 03-19-2013
5.00
Prep rear spar, left wing
Details

 03-16-2013
5.50
Ribs to spar
Details
       

 03-15-2013
2.00
Rib work
Details

 03-13-2013
3.50
Flap brackets & rib prep
Details

 03-12-2013
2.00
worked on ribs, left wing
Details
       

 03-11-2013
2.00
Left wing rib prep
Details
       

 03-09-2013
3.00
completed section 11!
Details
       

 03-07-2013
3.00
Right spar nut plates
Details

 03-06-2013
3.50
Started right spar
Details

 03-05-2013
1.50
Finished riveting nut plates on L spar
Details

 03-02-2013
7.50
Spar nutplates, left spar
Details
       

 03-01-2013
4.00
finished L spar J stringers
Details
       

 02-26-2013
3.00
Wing kit arrived today. Uncrated kit.
Details
       

 01-25-2013
15.00
Completed shop set up.
Details
       










Copyright © 2001-2024 Matronics. All Rights Reserved.