KitLog pro

Powered By Kitlog Pro v2.0

NORMAN'S WEB SITE
RV-10  
  All
Work Logs Found: 121
Category Work Time: 360 Hours
 Date
 Hours
 Work Log Summary

 Details
 12-25-2011
 3.00
 Installed wire run hardware and wiring for flaps,
       
 12-24-2011
 6.00
 Removed wiring and aft fus top skin
       
 12-20-2011
 6.00
 Removed wiring
 12-17-2011
 4.00
 Removed wiring
 12-04-2011
 7.00
 More wiring removal/fix
       
 12-03-2011
 6.00
 Began wiring removal on purchased RV-10 Fuselage
       
 11-22-2011
 3.00
 Pick up RV-10 Fus
       
 11-13-2011
 2.00
 mounted steps
 11-12-2011
 6.00
 rivweted top fowd fus structure and skin
 11-10-2011
 2.00
 fwd fus structure
 11-08-2011
 7.00
 upper fowd fus
 11-07-2011
 6.00
 upper fwd fus
 11-03-2011
 2.00
 torqued gear suport bolts
 11-02-2011
 5.00
 mounted gear supports
 10-31-2011
 1.00
 finished riveting skins!!!!
 10-30-2011
 1.50
 rivet lower fwd skins
 10-27-2011
 6.00
 finished mid-fus riveting; partially completed fwd
 10-26-2011
 6.00
 finished mid-fus skins
 10-25-2011
 1.50
 riveted most of rt mid skin to sub structure
 10-18-2011
 5.00
 riveted left mid fus skin
 10-16-2011
 1.00
 Began riveting skins and pro sealing firewall
 10-09-2011
 4.00
 clecoed skins to fuselage for riveting
 10-08-2011
 2.00
 riveted fus structure
 09-22-2011
 1.50
 Began riveting fus structure
 09-20-2011
 2.00
 primed skins
 09-05-2011
 1.50
 Installe dsound insulation in fus floor
 08-23-2011
 2.50
 dimpled aft side skins
 08-22-2011
 2.00
 dimpled forward side skins
 08-21-2011
 8.00
 deburred, c/s and dimpled structure and ribs
 08-20-2011
 4.50
 Drilled enge mount brackets. Began DDD
 08-19-2011
 3.00
 drilled for side skis -- ready to DDD!
       
 08-18-2011
 3.00
 bent and dry fit for fus side skins
 08-17-2011
 3.00
 drilled aft fus skins, mounted forw fus ribs
 08-15-2011
 2.50
 dry fit aft fus skins
     
 08-13-2011
 2.50
 bent longerons
     
 08-10-2011
 1.00
 prepped mid-fus longerons
 08-09-2011
 2.00
 finished fus floors;started longeron bends
     
 08-08-2011
 1.50
 fit and drilled LG assemblies
 08-07-2011
 4.00
 bent fus sides; mounted nid fus long
 08-05-2011
 1.00
 joined forward floor halves
     
 08-01-2011
 2.00
 riveted forward ribs to floor
 07-25-2011
 1.00
 pro sealed firewall and forward floor
 07-23-2011
 1.50
 riveted system ribs and 1043D
 07-22-2011
 1.00
 riveted ribs to forw bot skin
 07-19-2011
 2.00
 primed bottom for fus skin riveted rib assembly
 07-16-2011
 2.00
 dry fit for and aft fus
 07-09-2011
 1.00
 fabbed seat pans
 07-07-2011
 4.00
 Dry forward fus floors
 06-27-2011
 2.50
 riveted firewall support structure
 06-20-2011
 3.00
 prepped center fus parts
     
 06-17-2011
 3.00
 rivet firewall
     
 06-16-2011
 2.00
 finished floor, started riveting firewall
     
 06-15-2011
 2.00
 prepped firewall
 06-14-2011
 2.00
 rivet fus bottom skin
 06-13-2011
 2.00
 rivet fus bottom skin
 06-07-2011
 1.00
 Rivet bottom skin
 06-06-2011
 1.50
 dimpled and primed bottom skins
 06-02-2011
 2.00
 deburred and dimpled bottom skins
 05-31-2011
 4.00
 drilled and c/s floor and ribs
 05-30-2011
 4.50
 riveted floor ribs
 05-29-2011
 4.00
 riveted seat pan ribs
 05-28-2011
 4.00
 prepped ribs and rear spar
 05-27-2011
 2.00
 riveted rear spar attch
 05-24-2011
 4.00
 riveted spar attachments
 05-23-2011
 3.50
 prepped rear spar structure
 05-22-2011
 3.00
 rear spar prep
 05-21-2011
 1.00
 prepped aft main spar
 05-20-2011
 1.00
 main spar prep
 05-07-2011
 2.00
 drill wing spar
     
 05-06-2011
 1.00
 fit wing tips
     
 05-02-2011
 1.50
 spar prep
 05-02-2011
 5.00
 nutplates in wing tips
 05-01-2011
 1.00
 started fus kit
 05-01-2011
 2.00
 installed al strips in wing tips
 05-01-2011
 1.00
 finished fus inventory
     
 04-30-2011
 2.00
 install wing tips
 04-29-2011
 2.00
 install wing tips
 04-26-2011
 4.00
 Installed flaps & ailerons. Adjsuted control link
       
 04-22-2011
 1.00
 Startesd unpacking/inventory for fus kit
 04-18-2011
 4.00
 Assembled and installed ail control assemblly
 04-04-2011
 2.00
 right flap
 03-31-2011
 1.00
 primed flap skins
 03-28-2011
 2.00
 riveted ribs to left flap
 03-26-2011
 1.00
 left flap riveting
 03-25-2011
 2.00
 riveted left flap
 03-22-2011
 3.00
 Flap bebur & c/s
 03-21-2011
 2.00
 finished rt aileron; left flap prep
 03-19-2011
 2.00
 left flap prep
 03-17-2011
 1.50
 FLt flap prep; pro seal rt aileron trail. edge
 03-16-2011
 1.50
 flasp skelton assembly
 03-14-2011
 3.00
 flap prep
 03-13-2011
 2.50
 Finished rivets on ailerons -- pro sealed traling
 03-09-2011
 2.50
 Riveted aileron skins
 03-08-2011
 3.00
 Aileron prep
 03-07-2011
 2.00
 left aileron
 03-03-2011
 2.00
 ailerons
 02-28-2011
 3.00
 prepped stiffeners and ail skins
 02-27-2011
 2.50
 prepped ailerons
 02-25-2011
 1.50
 riveted rt tank baffle
 02-24-2011
 2.00
 Rivweted wing gap seals
 02-23-2011
 2.00
 Finished pro seal on right tank
 02-20-2011
 3.00
 Pro sealed rt tank, prepped flap gap seals
 02-19-2011
 1.50
 Pro sealed right tank ribs
 02-18-2011
 2.50
 Riveted right tank ribs
 02-16-2011
 4.00
 Finished left tank baffle, prosealed ribs in right
 02-15-2011
 3.00
 riveted baffle to lseft tank
 02-14-2011
 0.50
 installed pitot tube mount
 02-11-2011
 1.00
 Dimple right tank
 02-09-2011
 6.50
 Pro sealed left tank
       
 02-08-2011
 4.00
 riveted left tank ribs; prepped right tank
 02-07-2011
 5.00
 Prepped right fuel tank
 02-06-2011
 3.00
 Pro sealed left tank ribs
       
 02-04-2011
 4.50
 Wing stand and left fuel tank
 02-02-2011
 5.50
 Finished riveting right wg leading edge
 02-01-2011
 4.50
 Riveted right leading edge skin
 01-31-2011
 4.00
 finished left leading edge
 01-30-2011
 2.00
 Rivet lt leading edge to ribs
 01-29-2011
 2.00
 Alodine leading edge ribs
 01-23-2011
 5.00
 Left Fuel tank
 Details
 01-20-2011
 3.00
 Prep tank ribs
 01-19-2011
 20.00
 Left leading edge
 Details


SITE NAVIGATION  

Contact Builder


RV-10 Home

Category # Logs  # Hours


 All 121 360

 Fuselage 73 212

 Wings 48 148









Copyright © 2001-2024 Matronics. All Rights Reserved.