Date
|
Hours
|
Work Log Summary
|
Details
|
08-23-2014
|
8.00
|
Installed primer lines,checked and set new spark p
|
|
|
|
|
07-01-2011
|
6.00
|
Drilled holes in spinner mounting it to the prop a
|
Details
|
|
|
06-30-2011
|
3.00
|
Mounting the spinner to the prop.
|
Details
|
|
|
06-30-2011
|
3.00
|
Mounted the prop to the aircraft.
|
Details
|
|
|
06-28-2011
|
2.00
|
Fixed the bottom rudder fairing.
|
Details
|
|
|
06-26-2011
|
3.00
|
Working on mounting the pitot tube.
|
Details
|
|
|
06-25-2011
|
3.00
|
Working on the upper cowling.
|
Details
|
|
|
06-24-2011
|
4.00
|
Moved fusalage to airport.
|
Details
|
|
|
06-18-2011
|
3.00
|
Started working on the cowling.
|
Details
|
|
|
06-13-2011
|
1.50
|
Fitting the light strobe combo in the rudder fairi
|
Details
|
|
|
06-13-2011
|
4.00
|
Final fitting of the windshield fairing.
|
Details
|
|
|
06-05-2011
|
3.00
|
Working on the side and rear skirts of the canopy.
|
Details
|
|
|
06-05-2011
|
2.00
|
Smothing out the rear skirt of the canopy.
|
Details
|
|
|
06-02-2011
|
2.00
|
Reinforced elt bracket.
|
Details
|
|
|
04-27-2011
|
1.00
|
Shaped the pitot tube.
|
Details
|
|
|
03-29-2011
|
1.00
|
Sanding on the cowling.
|
Details
|
|
|
03-28-2011
|
0.50
|
New nav lights arrived.
|
Details
|
|
|
03-28-2011
|
2.00
|
Applied duraglass to parts of the cowling.
|
Details
|
|
|
03-14-2011
|
3.00
|
Mounting adel clamps to the motor mount for the wi
|
Details
|
|
|
03-13-2011
|
2.00
|
Making gaskit for my access panels.
|
Details
|
|
|
03-13-2011
|
3.00
|
Installed windshield.
|
Details
|
|
|
03-06-2011
|
3.00
|
Prepareing dash for the windshield instalation
|
Details
|
|
|
02-07-2011
|
7.00
|
Finishing up small items.
|
Details
|
|
|
|
02-05-2011
|
1.00
|
Put screws into the egress handles.
|
Details
|
|
|
02-05-2011
|
3.00
|
Made brackets for the sunvisors.
|
Details
|
|
|
02-05-2011
|
2.50
|
Installed the Dynon SV-32 pitch servo.
|
Details
|
|
|
02-03-2011
|
3.00
|
Working on the pitot tube.
|
Details
|
|
|
02-03-2011
|
1.50
|
Installing rivnuts to secure the fairing around th
|
Details
|
|
|
01-31-2011
|
2.00
|
Located the doubler for the second radio antenna.
|
Details
|
|
|
01-28-2011
|
2.00
|
Preparing skirt for fiberglass layup.
|
Details
|
|
|
01-27-2011
|
2.00
|
Working on the canopy skirt to make it a straight
|
Details
|
|
|
01-25-2011
|
1.00
|
Working on the fiberglass skirt on the sliding can
|
Details
|
|
|
01-24-2011
|
2.00
|
Reworking the rear skirt on the canopy.
|
Details
|
|
|
01-23-2011
|
3.00
|
Drilled holes for egress handles, and started work
|
Details
|
|
|
01-22-2011
|
2.00
|
Mounted the sun visors and located the holes for t
|
Details
|
|
|
01-08-2011
|
4.00
|
Sanding and fitting windshield fairing
|
Details
|
|
|
12-19-2010
|
5.00
|
Filling and sanding the windshield fairing
|
Details
|
|
|
12-06-2010
|
1.50
|
Sanding windshield fairing.
|
Details
|
|
|
|
12-04-2010
|
3.00
|
Filling in low spots on the front of the windshiel
|
Details
|
|
|
12-02-2010
|
3.00
|
Building up thin spots on thew windshield fairing.
|
Details
|
|
|
|
12-01-2010
|
3.50
|
Sanding the windshield fairing.
|
Details
|
|
|
|
11-28-2010
|
4.00
|
Started the final trimming of the windshield fairi
|
Details
|
|
|
11-27-2010
|
4.00
|
Trimming the windshield fairing.
|
Details
|
|
|
11-27-2010
|
0.50
|
Hooked up the instrument panel lighting.
|
Details
|
|
|
11-18-2010
|
0.50
|
Removed the ply and peel.
|
Details
|
|
|
11-17-2010
|
1.00
|
Taping off for fiberglass
|
Details
|
|
|
11-17-2010
|
4.50
|
Applied the fiberglass for the windshield fairing.
|
Details
|
|
|
11-15-2010
|
4.00
|
Shimming the windshield.
|
Details
|
|
|
11-10-2010
|
3.00
|
Started attachinhg the windscreen.
|
Details
|
|
|
11-09-2010
|
3.00
|
Sanded ,primed, and painted the glasre shield.
|
Details
|
|
|
11-09-2010
|
2.00
|
Mounted manual primer. Painted instrument overhang
|
Details
|
|
|
11-09-2010
|
1.00
|
Made a templite for the glareshield.
|
Details
|
|
|
11-05-2010
|
4.00
|
Installed crotch belt Bracket.
|
Details
|
|
|
10-30-2010
|
4.00
|
Rivited on the front deck lid.
|
Details
|
|
|
10-27-2010
|
3.50
|
Started installing front deck lid, clamped primer
|
Details
|
|
|
10-16-2010
|
4.00
|
Insulated the bcockpit area.
|
Details
|
|
|
|
10-09-2010
|
3.50
|
Ran primer lines.
|
Details
|
|
|
09-23-2010
|
10.00
|
Made the floor.
|
Details
|
|
|
09-06-2010
|
1.00
|
Located and drilled guards for the rudder cables.
|
Details
|
|
|
09-05-2010
|
4.00
|
Ran wireing for the cargo lighyts.
|
Details
|
|
|
|
09-05-2010
|
4.00
|
Made brackets and ran wireing for the cargo lights
|
Details
|
|
|
09-03-2010
|
3.00
|
Brackets for brake line and external power line.
|
Details
|
|
|
08-30-2010
|
3.50
|
Made brackets for brake lines and external power g
|
Details
|
|
|
08-29-2010
|
5.00
|
Rewired some of the wiring.
|
Details
|
|
|
08-29-2010
|
4.00
|
Relocating wiring.
|
Details
|
|
|
08-27-2010
|
2.00
|
Ran the shelded wiring for strobes.
|
Details
|
|
|
08-27-2010
|
5.00
|
Mounted strobe and elt bracket.
|
Details
|
|
|
08-25-2010
|
3.00
|
Added a hobbs meter.
|
Details
|
|
|
08-20-2010
|
6.00
|
Added an external power plug.
|
Details
|
|
|
10-12-2008
|
4.00
|
Installed heater cable.
|
Details
|
|
|
10-08-2008
|
2.00
|
Rivited the armrest bracket into place.
|
Details
|
|
|
10-08-2008
|
1.50
|
Made stops for the sliding cvanapy.
|
Details
|
|
|
10-08-2008
|
2.50
|
Installing map lights.
|
Details
|
|
|
10-08-2008
|
1.50
|
Installed the air vents.
|
Details
|
|
|
10-06-2008
|
4.00
|
Tie wrapping wires together.
|
Details
|
|
|
10-05-2008
|
4.00
|
Wiring switches,Painted parts.
|
Details
|
|
|
10-03-2008
|
2.00
|
Finished the armrest barcket.
|
Details
|
|
|
10-03-2008
|
3.00
|
Drilling,mounting, and locating the map light hole
|
Details
|
|
|
10-02-2008
|
3.00
|
Reinforceing the armrests.
|
Details
|
|
|
10-01-2008
|
5.00
|
Running and tieing in wires, making brackets for a
|
Details
|
|
|
|
09-30-2008
|
4.00
|
Hooking up wireing to various switches.
|
Details
|
|
|
09-29-2008
|
4.00
|
Putting in switches and lettering the instrument p
|
Details
|
|
|
09-28-2008
|
3.00
|
Changing bolts in venter section.
|
Details
|
|
|
09-25-2008
|
1.00
|
Secured the ignition wires.
|
Details
|
|
|
09-25-2008
|
4.00
|
Painted the instrument panel
|
Details
|
|
|
09-25-2008
|
1.00
|
Mounted the glove box.
|
Details
|
|
|
09-24-2008
|
2.00
|
Finishing the glove box.
|
Details
|
|
|
|
09-23-2008
|
3.00
|
Primed the instrument panel, finished glove box.
|
Details
|
|
|
|
09-22-2008
|
2.00
|
Preparing instrument for paint.
|
Details
|
|
|
|
09-21-2008
|
6.00
|
Working on glove box.
|
Details
|
|
|
09-18-2008
|
5.00
|
Making the glove box and fitting it to the instrum
|
Details
|
|
|
09-17-2008
|
1.00
|
Cutting hole for the glove box, and AP74 auto pilo
|
Details
|
|
|
09-06-2008
|
3.00
|
Cutting holes in the instrument pannel.
|
Details
|
|
|
09-05-2008
|
2.00
|
Running efis wires.
|
Details
|
|
|
08-31-2008
|
3.50
|
Removing instrument panel to cutin the instruments
|
Details
|
|
|
08-25-2008
|
1.00
|
installing warning lights
|
Details
|
|
|
08-24-2008
|
3.00
|
Mounted the oil cooler.
|
Details
|
|
|
08-16-2008
|
4.00
|
Brackets for oil cooler
|
Details
|
|
|
08-10-2008
|
1.50
|
Running the fuel line from my gasolater to the fue
|
Details
|
|
|
08-10-2008
|
3.00
|
Running scat tube to heat muff.
|
Details
|
|
|
07-29-2008
|
2.00
|
Running the ignition leads.
|
Details
|
|
|
07-29-2008
|
2.00
|
Changin the hose clamps.
|
Details
|
|
|
07-28-2008
|
2.00
|
Mounted firewall through hole covers.
|
Details
|
|
|
07-12-2008
|
3.00
|
Mounted the fuelflow valve.
|
Details
|
|
|
07-11-2008
|
2.00
|
Ran wiring for the remote compass.
|
Details
|
|
|
07-07-2008
|
3.00
|
Starter studs instaled.
|
Details
|
|
|
07-05-2008
|
2.00
|
Made a bracketfor the remote compass.
|
Details
|
|
|
|
07-04-2008
|
4.00
|
Installed the voltage shunt.
|
Details
|
|
|
07-03-2008
|
4.00
|
Started running all the efis wires through the fir
|
Details
|
|
|
07-03-2008
|
3.00
|
Checked efis wiring continuity.
|
Details
|
|
|
|
07-02-2008
|
2.00
|
Installed the carb heat sensor.
|
Details
|
|
|
07-02-2008
|
2.00
|
Dropped of starter for inspection.
|
Details
|
|
|
|
06-30-2008
|
2.00
|
EGT wire leads instaled.
|
Details
|
|
|
06-30-2008
|
1.00
|
CHT wires instaled.
|
Details
|
|
|
04-27-2008
|
3.00
|
Fitting the right wingtip.
|
Details
|
|
|
|
04-26-2008
|
5.00
|
Had to refit the left wingtip.
|
Details
|
|
|
|
04-19-2008
|
3.00
|
Bolting on the rails for the canopy to slide in
|
Details
|
|
|
|
05-18-2007
|
3.00
|
Riviting gap seal onto the baffeling.
|
Details
|
|
|
05-18-2007
|
2.50
|
Fittining the exhaust.
|
Details
|
|
|
05-12-2007
|
10.00
|
Finished all the gap seal.
|
Details
|
|
|
05-11-2007
|
9.00
|
Mounting the gap seal.
|
Details
|
|
|
05-05-2007
|
6.00
|
Rivited all the baffeling parts together.
|
Details
|
|
|
05-03-2007
|
2.00
|
Primed all the baffeling parts.
|
Details
|
|
|
05-02-2007
|
3.00
|
Alumnidined all baffeling parts.
|
Details
|
|
|
|
05-01-2007
|
3.00
|
Scotch briting all the parts to the baffeling.
|
Details
|
|
|
|
04-30-2007
|
3.00
|
Deburing parts
|
Details
|
|
|
|
04-25-2007
|
2.50
|
Drilling for the oil cooler.
|
Details
|
|
|
|
04-24-2007
|
6.00
|
Cutting the baffeling.
|
Details
|
|
|
|
04-23-2007
|
2.00
|
Fitting baffeling
|
Details
|
|
|
|
04-22-2007
|
8.00
|
Makeing brackets.
|
Details
|
|
|
|
04-21-2007
|
10.00
|
Working on the engine baffeling.
|
Details
|
|
|
|
04-20-2007
|
2.00
|
Locating all the baffeling parts.
|
Details
|
|
|
|
04-15-2007
|
5.00
|
Mating the top- and lower colwing to each other.
|
Details
|
|
|
04-15-2007
|
4.00
|
Making a bracket to hold the back of the cowling t
|
Details
|
|
|
04-14-2007
|
4.00
|
Fitt upper and lower cowling.
|
Details
|
|
|
05-21-2006
|
4.00
|
Observed my 0-320 run after TDI.
|
Details
|
|
|
04-03-2006
|
4.00
|
Observing engine TDI
|
Details
|
|
|
03-04-2006
|
1.00
|
Run the static line.
|
Details
|
|
|
03-04-2006
|
4.00
|
Riviting the rear turtle deck on.
|
Details
|
|
|
03-04-2006
|
3.00
|
Made and instald brackets for the static line.
|
Details
|
|
|
03-04-2006
|
3.00
|
Drilling the wing gap fairings
|
Details
|
|
|
03-03-2006
|
3.00
|
Mounted the left flap bracket.
|
Details
|
|
|
03-02-2006
|
3.00
|
Mounted the right flap bracket.
|
Details
|
|
|
|
03-01-2006
|
3.00
|
Drilled the fuel tank attach brackets.
|
Details
|
|
|
02-28-2006
|
5.00
|
Drilled both rear spars.
|
Details
|
|
|
02-27-2006
|
2.00
|
Had wing demention inspected before I drilled rea
|
Details
|
|
|
02-26-2006
|
1.00
|
Installing static line on bulkhead.
|
Details
|
|
|
02-25-2006
|
1.50
|
Setting the sweep on the wings.
|
Details
|
|
|
02-25-2006
|
3.00
|
Set the wing incidence.
|
Details
|
|
|
02-25-2006
|
2.50
|
Mounted the empennage.
|
Details
|
|
|
02-24-2006
|
2.00
|
Mounted both wings.
|
Details
|
|
|
02-19-2006
|
0.50
|
Mounting the cylonide doubler plate.
|
Details
|
|
|
02-19-2006
|
2.00
|
Makeing the stick boot rings.
|
Details
|
|
|
02-19-2006
|
2.50
|
Makeing attach brackets.
|
Details
|
|
|
02-18-2006
|
2.00
|
Makeing the cylinoid doubler plate.
|
Details
|
|
|
02-18-2006
|
2.00
|
Building the battery hold down bar.
|
Details
|
|
|
02-17-2006
|
3.00
|
Built battery box.
|
Details
|
|
|
02-12-2006
|
0.50
|
Installed fittings into the brake cylinders.
|
Details
|
|
|
02-12-2006
|
4.00
|
Cleaned shop.
|
Details
|
|
|
|
02-11-2006
|
1.00
|
Putting the gear on the plane.
|
Details
|
|
|
02-11-2006
|
1.00
|
Putting in rudder cables.
|
Details
|
|
|
02-11-2006
|
0.50
|
Primed the large elevator tube.
|
Details
|
|
|
02-11-2006
|
3.00
|
Greasing bearings, mounting the front wheel.
|
Details
|
|
|
02-10-2006
|
2.00
|
Priming landing gear parts.
|
Details
|
|
|
02-10-2006
|
2.00
|
Drilled holes in the firewall.
|
Details
|
|
|
02-09-2006
|
2.00
|
Finished the manual trim bracket.
|
Details
|
|
|
02-08-2006
|
2.00
|
Working on the manual trim handle.
|
Details
|
|
|
02-05-2006
|
3.00
|
Mounted and rivited the rudder bracket and the fir
|
Details
|
|
|
02-05-2006
|
3.00
|
Located,drilled,and clecoed the fresh air NACA ven
|
Details
|
|
|
02-04-2006
|
8.00
|
Drilling and fitting the sub panal and rollbar.
|
Details
|
|
|
02-03-2006
|
3.00
|
Fitting the subpanel and rollbar..
|
Details
|
|
|
02-01-2006
|
2.00
|
Finished the fuel lines.
|
|
|
|
01-31-2006
|
3.00
|
Hooking up the fuel valve
|
|
|
|
01-26-2006
|
1.50
|
Ran the right brake line and the right side vent l
|
|
|
|
01-24-2006
|
2.00
|
Ran a brake and vent line.
|
|
|
|
01-23-2006
|
1.00
|
Drilled the motor mount to the firwall.
|
|
|
|
01-22-2006
|
1.50
|
Put in the fuel and brake line fittings.
|
|
|
|
01-21-2006
|
1.50
|
Fit the front landing gear, put tires together.
|
|
|
|
10-07-2005
|
12.00
|
Removed a wall in the workshop.
|
Details
|
|
|
09-30-2005
|
3.00
|
Picked up the engine.
|
Details
|
|
|
09-28-2005
|
5.00
|
Rivited forward and aft canopy covers.
|
Details
|
|
|
09-26-2005
|
8.00
|
Fit debured and primed flap bracket and cover
|
Details
|
|
|
09-25-2005
|
3.00
|
Installed the rudder.
|
Details
|
|
|
09-25-2005
|
8.00
|
Fit the landing gear legs to the landing gear brac
|
Details
|
|
|
|
09-24-2005
|
1.50
|
Made the large pushrod.
|
Details
|
|
|
09-24-2005
|
1.50
|
Made small pushrod.
|
Details
|
|
|
09-24-2005
|
6.00
|
Instaling the vertical stabelizer.
|
Details
|
|
|
09-23-2005
|
4.00
|
Working on the stabelizer.
|
Details
|
|
|
09-22-2005
|
4.00
|
Drilled the elevater horns.
|
Details
|
|
|
09-18-2005
|
6.00
|
Fit debured and primed the center cabin covers.
|
Details
|
|
|
|
09-02-2005
|
2.00
|
Riviting on the steps.
|
|
|
|
09-01-2005
|
1.00
|
Putting in the cotter pins for the brake pedals an
|
|
|
|
08-31-2005
|
3.00
|
Riviting the seats together.
|
|
|
|
08-31-2005
|
2.00
|
Riviting the front braces on.
|
|
|
|
08-31-2005
|
2.50
|
riviting the bulkhead to the rear deck and the rea
|
|
|
|
08-29-2005
|
3.00
|
Finished priming all the existing parts.
|
|
|
|
08-28-2005
|
5.00
|
Alodined and primed several parts for the interior
|
|
|
|
08-20-2005
|
8.00
|
Deburing and cleaning parts.
|
Details
|
|
|
|
08-19-2005
|
3.50
|
Finishing some riviting up on the lower fuselage.
|
|
|
|
08-18-2005
|
2.50
|
Getting upper fuselage ready for deburing.
|
|
|
|
|
08-17-2005
|
4.50
|
Disassemble upper fuselage for debure and prime
|
|
|
|
|
08-15-2005
|
2.50
|
Disassembling upper fuselage.
|
Details
|
|
|
|
08-14-2005
|
5.00
|
Finished the seats,mounted the seat pans, finished
|
Details
|
|
|
08-13-2005
|
10.00
|
Built the seats.
|
Details
|
|
|
08-12-2005
|
3.50
|
Fitting the steps,elevator control, and luggage w
|
Details
|
|
|
08-08-2005
|
2.00
|
Installing the step kits.
|
|
|
|
|
08-07-2005
|
1.00
|
Debured , primed and rivited the elevator control
|
|
|
|
08-07-2005
|
4.00
|
Cut and mounted the stifners and the fuselage skin
|
Details
|
|
|
08-06-2005
|
5.00
|
Mounted the rudders and brake pedels.
|
|
|
|
08-06-2005
|
0.50
|
Made and mounted the seat belt brackets.
|
Details
|
|
|
08-06-2005
|
1.50
|
Drilled and clecoed the front firewall brackets.
|
|
|
|
08-05-2005
|
3.00
|
Squared the fuselage and drilled the rear deck pla
|
Details
|
|
|
07-30-2005
|
5.50
|
Finished bucking rivitson the lower fuselage.
|
|
|
|
|
07-25-2005
|
1.00
|
Bucking rivits on the bottom forward section of th
|
|
|
|
|
07-24-2005
|
3.00
|
Putting rivits in holes and building the saw bucks
|
Details
|
|
|
07-23-2005
|
3.00
|
Riviting the front floor skin on.
|
|
|
|
07-22-2005
|
2.00
|
Riviting the forward side skins on.
|
|
|
|
07-21-2005
|
2.00
|
Riviting the forward fuselage skins on.
|
|
|
|
|
07-20-2005
|
1.50
|
Started riviting the forward fuselage skins on.
|
Details
|
|
|
07-19-2005
|
2.00
|
Rivited the brake peddles together.
|
Details
|
|
|
07-18-2005
|
12.00
|
Primed and reassembled forward fuselage.
|
Details
|
|
|
07-16-2005
|
10.00
|
Priming and reassembly
|
Details
|
|
|
07-15-2005
|
4.00
|
Cleaning forward fuselage parts.
|
Details
|
|
|
|
06-26-2005
|
7.00
|
Deburing fuselage parts.
|
Details
|
|
|
06-25-2005
|
5.00
|
Deburing and counter sinking parts.
|
Details
|
|
|
06-24-2005
|
7.00
|
Counter sinking parts.
|
Details
|
|
|
|
06-21-2005
|
3.00
|
Deburing parts.
|
Details
|
|
|
|
06-20-2005
|
3.00
|
Disasembled fuselage.
|
Details
|
|
|
|
06-18-2005
|
5.00
|
Located landing gear mounts.
|
Details
|
|
|
06-16-2005
|
1.50
|
Fitting the luggage compartment ribs.
|
Details
|
|
|
|
06-15-2005
|
2.00
|
Working on the rudder pedals.
|
Details
|
|
|
06-13-2005
|
4.00
|
Fitted front fuselage braceing.
|
|
|
|
05-31-2005
|
1.50
|
Locating the lower short langerons.
|
Details
|
|
|
05-31-2005
|
3.00
|
Cutting holes in center section.
|
Details
|
|
|
05-30-2005
|
4.00
|
Drillling side pannels.
|
Details
|
|
|
05-21-2005
|
6.00
|
Drilling the side skins.
|
Details
|
|
|
05-21-2005
|
5.00
|
Attaching the center section.
|
Details
|
|
|
05-20-2005
|
2.00
|
Finished riviting the center section.
|
Details
|
|
|
05-19-2005
|
2.00
|
Riviting the seat ribs.
|
Details
|
|
|
05-18-2005
|
4.00
|
Fitting the seat pans to the seat ribs.
|
Details
|
|
|
04-28-2005
|
5.00
|
Teardown of the center section.
|
Details
|
|
|
04-23-2005
|
4.00
|
Working on the center fuselage bulkhead.
|
Details
|
|
|
04-22-2005
|
3.00
|
Fitting longerons to the rear fuselage.
|
Details
|
|
|
04-21-2005
|
8.00
|
Bending Longerons
|
Details
|
|
|
04-13-2005
|
4.00
|
Riviting the aft fuselage.
|
Details
|
|
|
04-13-2005
|
2.00
|
Drilled out center section skin.
|
Details
|
|
|
04-12-2005
|
4.00
|
Fitting the outer ribs.
|
Details
|
|
|
04-11-2005
|
2.00
|
Making shims and working on ribs.
|
Details
|
|
|
04-11-2005
|
2.00
|
Building the seating section.
|
Details
|
|
|
04-10-2005
|
6.00
|
Building the 705A bulkhead
|
|
|
|
04-09-2005
|
4.00
|
Debured and primed parts.
|
Details
|
|
|
04-09-2005
|
2.00
|
cutting the 605-c bar doubler.
|
Details
|
|
|
03-25-2005
|
6.00
|
Started riviting the rear fuselage.
|
Details
|
|
|
03-24-2005
|
4.00
|
Alodined and primed parts.
|
Details
|
|
|
03-22-2005
|
2.50
|
Dimpling rear fuselage parts.
|
Details
|
|
|
03-20-2005
|
1.00
|
Rudder stop
|
Details
|
|
|
03-20-2005
|
2.00
|
Match drilling rear fuselage.
|
Details
|
|
|
03-20-2005
|
2.00
|
Deburing and dimpling parts.
|
Details
|
|
|
03-19-2005
|
2.00
|
Trimming support J channels.
|
Details
|
|
|
03-19-2005
|
4.50
|
Preping parts for primer.
|
Details
|
|
|
03-19-2005
|
5.00
|
Match drilling holes to the J channels.
|
Details
|
|
|
03-19-2005
|
4.00
|
Clecoed skins to the bulkheads.
|
Details
|
|
|
03-17-2005
|
5.00
|
Deburing parts.
|
Details
|
|
|
|
03-14-2005
|
1.50
|
Drilling shims for the 705 bulkhead.
|
Details
|
|
|
03-13-2005
|
1.00
|
Maiting stifner and bulkhead tohether.
|
Details
|
|
|
03-13-2005
|
1.50
|
Fabrcated the tiedown bracket.
|
Details
|
|
|
03-13-2005
|
2.00
|
Building the 711 bulkhead.
|
Details
|
|
|
03-12-2005
|
0.50
|
Fitting the bulkhead parts.
|
Details
|
|
|
03-12-2005
|
1.50
|
Fitting the 706 bulkhead parts.
|
Details
|
|
|
03-11-2005
|
4.00
|
Deburing several parts.
|
Details
|
|
|
03-10-2005
|
1.00
|
Riviting on nut plates on the center sec
|
Details
|
|
|
03-10-2005
|
2.00
|
Preparing the seat braceing.
|
Details
|
|
|
03-09-2005
|
2.50
|
Riviting the side plates onto the center
|
|
|
|
03-09-2005
|
2.00
|
Preparing control arm brackets.
|
Details
|
|
|
03-08-2005
|
1.00
|
Enlarging holes for snap bushings.
|
|
|
|
03-07-2005
|
4.00
|
Finished the firewall started center sec
|
Details
|
|
|
03-06-2005
|
3.00
|
Riviting the braceing to the firewall.
|
|
|
|
03-05-2005
|
1.00
|
Priming all the firewall braceing.
|
|
|
|
03-05-2005
|
2.50
|
Dimpling the firewall.
|
Details
|
|
|
03-04-2005
|
2.50
|
Made fuel pump doubler.
|
Details
|
|
|
03-03-2005
|
2.00
|
Drilling matching holes in the firewall.
|
Details
|
|
|
03-02-2005
|
2.50
|
Braceing the firewall.
|
Details
|
|
|
03-01-2005
|
1.50
|
Fabricating firewall brackets.
|
Details
|
|
|
02-26-2005
|
2.00
|
Built shelving to hold the fuselage part
|
|
|
|
|
02-15-2005
|
2.00
|
Sorting bolts.
|
Details
|
|
|
|
02-13-2005
|
5.00
|
Inventoring the fuselage parts.
|
|
|
|
02-12-2005
|
6.00
|
Unpacking the fuselage boxes.
|
|
|
|
02-08-2005
|
2.00
|
Picked up fuselage from ABF in Lima.
|
Details
|
|
|
02-01-2005
|
1.00
|
Finished riviting the skin on.
|
Details
|
|
|
01-24-2005
|
2.00
|
Started riviting the skin on.
|
Details
|
|
|
01-23-2005
|
3.00
|
Dimpling and priming.
|
Details
|
|
|
01-22-2005
|
2.50
|
Match drilling.
|
Details
|
|
|
01-02-2005
|
5.00
|
Working on the frame.
|
Details
|
|
|
01-01-2005
|
4.00
|
Drilled and primed the main spar.
|
|
|
|
12-31-2004
|
4.00
|
Setting up my new air compressor.
|
Details
|
|
|
11-27-2004
|
6.00
|
Cleaning the shop.
|
Details
|
|
|
11-21-2004
|
5.00
|
Preparing for the arrival of the fusalag
|
Details
|
|
|
|
11-20-2004
|
3.00
|
Finished the wing cradle.
|
Details
|
|
|
11-18-2004
|
3.00
|
Building a jig to hold the finished wing
|
Details
|
|
|
11-16-2004
|
2.50
|
Fitting the left wing tip.
|
|
|
|
11-15-2004
|
0.50
|
Finished riviting the bottom skins.
|
|
|
|
11-14-2004
|
2.50
|
Riviting the bottom skin on.
|
|
|
|
|
11-13-2004
|
2.00
|
Riviting the bottom skin on.
|
|
|
|
|
11-07-2004
|
2.00
|
Fitting the lens to the leading edge.
|
|
|
|
11-06-2004
|
1.00
|
Preparing the leading edge for the light
|
|
|
|
11-06-2004
|
1.40
|
Makeing the mounting bracket.
|
|
|
|
11-05-2004
|
1.50
|
Riviting bottom skins on.
|
|
|
|
11-05-2004
|
2.50
|
Putting a light into the leading edge.
|
Details
|
|
|
11-03-2004
|
2.00
|
Finished on the first of the lower skins
|
|
|
|
11-02-2004
|
1.50
|
Riviting bottom skin on.
|
|
|
|
10-31-2004
|
1.50
|
Sealed the fuel sending units.
|
Details
|
|
|
10-31-2004
|
0.50
|
Drilled 2-1/4 hole in the wingtip ribs.
|
|
|
|
10-27-2004
|
2.00
|
finished the bottom skins.
|
Details
|
|
|
10-24-2004
|
2.00
|
Fitting the right wingtip.
|
Details
|
|
|
10-20-2004
|
4.00
|
Riviting the lower skins on.
|
|
|
|
|
10-17-2004
|
4.50
|
Riviting the bottom skin on.
|
Details
|
|
|
10-16-2004
|
2.50
|
Riviting the bottom skins on.
|
Details
|
|
|
10-15-2004
|
1.00
|
Cleaned clecoes.
|
Details
|
|
|
10-14-2004
|
1.00
|
Pro sealed electrical conduit .
|
|
|
|
10-13-2004
|
2.00
|
Bolting the fuel tanks to the spar.
|
|
|
|
10-12-2004
|
2.00
|
Bolting tankes to the wing spar.
|
|
|
|
10-11-2004
|
1.50
|
Primed back of fuel tanks.
|
Details
|
|
|
10-10-2004
|
2.00
|
Checking tanks for leaks.
|
Details
|
|
|
10-06-2004
|
5.00
|
Rivited the rear baffel on the left tank
|
Details
|
|
|
10-04-2004
|
1.00
|
Cleaned pro seal off of clecoes.
|
Details
|
|
|
|
10-03-2004
|
5.00
|
Mounting the rear baffel.
|
Details
|
|
|
09-30-2004
|
4.00
|
Setting ailerons to the neutral posetion
|
Details
|
|
|
09-29-2004
|
2.00
|
Fitting the floats in the fuel tanks..
|
Details
|
|
|
09-28-2004
|
4.00
|
Setting the vent lines.
|
Details
|
|
|
09-19-2004
|
3.00
|
Installed gap fairings.
|
Details
|
|
|
09-10-2004
|
1.50
|
putting in vent lines.
|
Details
|
|
|
|
09-10-2004
|
1.00
|
Finished riviting the wing
|
Details
|
|
|
|
09-06-2004
|
7.00
|
Riviting top skins on.
|
Details
|
|
|
09-05-2004
|
3.00
|
Riviting the gap fairings on.
|
Details
|
|
|
09-05-2004
|
4.00
|
Riviting on the leading edge.
|
Details
|
|
|
09-04-2004
|
3.00
|
Primed parts.
|
Details
|
|
|
09-04-2004
|
3.00
|
Finished the push pull tubes.
|
Details
|
|
|
09-03-2004
|
3.00
|
Preparing skins for primer
|
Details
|
|
|
09-03-2004
|
5.00
|
Drilling the control rods.
|
Details
|
|
|
09-02-2004
|
5.00
|
Dimpling wing skins.
|
|
|
|
|
08-26-2004
|
2.50
|
Deburing and dimpling wing skins.
|
Details
|
|
|
08-25-2004
|
8.00
|
Drilled and dimpled skins and ribs.
|
Details
|
|
|
08-22-2004
|
2.00
|
Fuel tank endplate.
|
Details
|
|
|
08-21-2004
|
4.00
|
Working on the ribs.
|
|
|
|
|
08-15-2004
|
3.00
|
Rivited the ribs to the rear spar.
|
|
|
|
08-14-2004
|
2.00
|
Rivited the ribs to the main spar.
|
|
|
|
08-13-2004
|
2.00
|
Rivited the flap brackets to the ribs.
|
|
|
|
08-11-2004
|
4.00
|
Drilled flap brackets.
|
Details
|
|
|
|
08-10-2004
|
3.00
|
Worked on ribs and main spar.
|
Details
|
|
|
|
08-09-2004
|
1.00
|
Worked on ribs.
|
Details
|
|
|
|
08-08-2004
|
2.50
|
Finished riviting the top skins on.
|
Details
|
|
|
|
08-07-2004
|
4.00
|
Riviting the top skins on.
|
|
|
|
08-06-2004
|
2.00
|
Riviting the top skins on.
|
|
|
|
|
07-31-2004
|
4.00
|
Riviting & sealing the ribs.
|
|
|
|
|
07-30-2004
|
3.00
|
Riviting & sealing the ribs.
|
|
|
|
|
08-09-2003
|
4.00
|
Getting tank ready for riviting.
|
|
|
|
|
05-25-2002
|
5.00
|
Riviting and sealing the ribs.
|
Details
|
|
|
05-25-2002
|
2.00
|
Dimpled and rivited left leading edge.
|
Details
|
|
|
05-24-2002
|
3.00
|
Sealing the drain and filler cap.
|
Details
|
|
|
05-22-2002
|
3.00
|
Sealing the filler cap, and drain valve.
|
Details
|
|
|
05-21-2002
|
3.00
|
Fitting fuel tank parts.
|
Details
|
|
|
05-20-2002
|
3.00
|
Drilling skins the the ribs.
|
Details
|
|
|
04-14-2002
|
1.50
|
Sealing the end rib of the fuel tank.
|
Details
|
|
|
04-14-2002
|
1.50
|
Sealing the end rib of the fuel tank.
|
Details
|
|
|
04-12-2002
|
2.00
|
Working on the splice for the left wing.
|
Details
|
|
|
04-12-2002
|
2.00
|
Clecoed and drilled the leading edge.
|
Details
|
|
|
04-11-2002
|
1.50
|
Clecoeing and drilling the left fuel tan
|
Details
|
|
|
04-10-2002
|
1.50
|
Drilling a clecoeing the leading edge.
|
Details
|
|
|
03-29-2002
|
3.00
|
Dimpling wing parts.
|
Details
|
|
|
03-29-2002
|
2.00
|
Deburing the skins.
|
Details
|
|
|
03-20-2002
|
5.00
|
Worked on the leading edge.
|
Details
|
|
|
03-18-2002
|
1.50
|
Scuffing the fuel tank for pro seal.
|
|
|
|
03-18-2002
|
1.50
|
Riviting the leading edge.
|
|
|
|
|
03-17-2002
|
3.00
|
Debured and dimpled the wing frame.
|
Details
|
|
|
03-16-2002
|
1.50
|
Debured and dimpled fuel tank parts.
|
|
|
|
03-16-2002
|
3.00
|
Debured and dimpled the leading edge.
|
Details
|
|
|
03-15-2002
|
4.00
|
Debured and primed several wing parts.
|
|
|
|
03-13-2002
|
1.00
|
Working on the cover for the fuel tank.
|
Details
|
|
|
03-13-2002
|
4.00
|
Debured and primed several wing parts.
|
Details
|
|
|
03-13-2002
|
1.50
|
Cut and fit the left cover plate for the
|
Details
|
|
|
03-12-2002
|
3.00
|
Working on the right fuel tank.
|
Details
|
|
|
03-11-2002
|
4.00
|
Working on the right fuel tank.
|
Details
|
|
|
03-10-2002
|
4.50
|
Made the angle bracket and nose stiffner
|
Details
|
|
|
03-03-2002
|
4.00
|
Deburing and dimpling some of the skins.
|
|
|
|
|
03-01-2002
|
2.00
|
Primed parts
|
Details
|
|
|
|
02-28-2002
|
4.00
|
Right fuel tank.Checked wing twist.
|
Details
|
|
|
02-28-2002
|
4.00
|
Clecoed and drilled the leading edge.
|
Details
|
|
|
02-27-2002
|
11.00
|
Fitting the top and bottom skins.
|
Details
|
|
|
02-26-2002
|
9.00
|
Setting up wing skeleton
|
Details
|
|
|
02-25-2002
|
5.00
|
Finished priming all the ribs.
|
|
|
|
|
02-25-2002
|
4.00
|
Assembled the ribs.
|
Details
|
|
|
|
02-23-2002
|
2.00
|
Primed and rivited right rear spar.
|
Details
|
|
|
|
02-23-2002
|
4.00
|
Drilled debured and rivited the spar
|
Details
|
|
|
02-23-2002
|
2.00
|
Debured and primed wing ribs.
|
|
|
|
02-22-2002
|
6.00
|
Working on the right rear spar.
|
Details
|
|
|
02-21-2002
|
2.00
|
Started deburing the right rear spar.
|
Details
|
|
|
02-21-2002
|
2.00
|
Made a work table
|
Details
|
|
|
|
02-21-2002
|
1.50
|
Finished the right aileron.
|
Details
|
|
|
|
02-21-2002
|
2.50
|
Counter sinking spar for #6 screw.
|
Details
|
|
|
02-21-2002
|
2.00
|
Counter sinking for #6 screws.
|
Details
|
|
|
02-20-2002
|
6.00
|
Finish riviting the left aileron.
|
Details
|
|
|
|
02-19-2002
|
4.00
|
Started the right aileron.
|
Details
|
|
|
|
02-19-2002
|
2.00
|
Finished right aileron
|
Details
|
|
|
|
02-17-2002
|
4.50
|
Starting final assemble on the aileron.
|
|
|
|
02-17-2002
|
3.00
|
Drilling matched holes on the aileron.
|
Details
|
|
|
02-16-2002
|
1.50
|
Dimpling aileron parts.
|
|
|
|
02-15-2002
|
2.00
|
Riviting the right flap.
|
|
|
|
02-15-2002
|
2.00
|
Finished the right flap.
|
Details
|
|
|
02-13-2002
|
6.00
|
Doing finish work on the right flap.
|
|
|
|
02-11-2002
|
2.50
|
Priming parts for the right flap.
|
|
|
|
|
02-10-2002
|
6.00
|
Cleaning up parts to the right flap.
|
Details
|
|
|
02-09-2002
|
2.50
|
mounting the angleiron jig for the flaps
|
Details
|
|
|
02-08-2002
|
8.00
|
Final assembly of the left flap
|
Details
|
|
|
02-05-2002
|
12.00
|
Working on the right flap.
|
Details
|
|
|
02-04-2002
|
8.00
|
Working on the left flaps.
|
Details
|
|
|
02-02-2002
|
8.00
|
Debured and primed parts.
|
Details
|
|
|
|
01-31-2002
|
6.00
|
working on ailerons
|
Details
|
|
|
|
01-27-2002
|
3.00
|
Fitting Rib stifners to left aileron
|
Details
|
|
|
01-26-2002
|
8.00
|
Cleaned shop
|
|
|
|
|
10-12-2001
|
6.00
|
Unpacked Empennage and wings
|
Details
|
|
|
